User Manual
Table Of Contents
- About this manual
- Chapter 1. Safety information
- Chapter 2. Important service information
- Chapter 3. General checkout
- Chapter 4. Related service information
- Chapter 5. Special keys
- Chapter 6. Locations
- Chapter 7. FRU replacement notices
- Chapter 8. Removing or replacing a FRU
- General guidelines
- Before servicing the computer
- 1010 Base cover assembly
- 1020 2242 M.2 solid-state drive
- 1030 Wireless-WAN card (for selected models)
- 1040 Thermal fan assembly
- 1050 Power button board and power button board cable
- 1060 Built-in battery
- 1070 Speaker assembly near the built-in battery
- 1080 Trackpad, fingerprint reader and P-sensor cable
- 1090 Trackpad
- 1100 Fingerprint reader module and bracket
- 1110 Wireless-LAN antenna assembly
- 1120 System board assembly
- 1130 Wireless-WAN antenna assembly (for selected models)
- 1140 Speaker assembly near the hinges
- 1150 LCD unit
- 1160 Keyboard bezel assembly with keyboard
- Appendix A. Notices
- Appendix B. Abbreviation table
1. Turn off the computer.
2. Visually check each FRU for damage. Replace any damaged FRU.
3. Remove or disconnect all of the following devices:
a. Non-ThinkPad devices
b. Devices attached to the dock
c. Printer, mouse, and other external devices
d. Battery
e. Solid-state drive
f. External diskette drive or optical drive
g. Memory module
h. PC cards
4. Turn on the computer.
5. Determine whether the problem has been solved.
6. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU.
7. If the problem remains, replace the following FRUs one at a time (do not replace a nondefective FRU):
a. System board
b. LCD assembly
Chapter 4. Related service information 39