User Manual
Table Of Contents
- About this manual
- Chapter 1. Safety information
- Chapter 2. Important service information
- Chapter 3. General checkout
- Chapter 4. Related service information
- Chapter 5. Special keys
- Chapter 6. Locations
- Chapter 7. FRU replacement notices
- Chapter 8. Removing or replacing a FRU
- General guidelines
- Before servicing the computer
- 1010 Base cover assembly
- 1020 2242 M.2 solid-state drive
- 1030 Wireless-WAN card (for selected models)
- 1040 Thermal fan assembly
- 1050 Power button board and power button board cable
- 1060 Built-in battery
- 1070 Speaker assembly near the built-in battery
- 1080 Trackpad, fingerprint reader and P-sensor cable
- 1090 Trackpad
- 1100 Fingerprint reader module and bracket
- 1110 Wireless-LAN antenna assembly
- 1120 System board assembly
- 1130 Wireless-WAN antenna assembly (for selected models)
- 1140 Speaker assembly near the hinges
- 1150 LCD unit
- 1160 Keyboard bezel assembly with keyboard
- Appendix A. Notices
- Appendix B. Abbreviation table
1 Country label
2 IMEI label
3 Asset tag 4 Asset tag_40Y917Y
5 Windows label
6 Serial number label
7 China CECP label 8 GEO label
9 GEO label
1020 2242 M.2 solid-state drive
For access, remove this FRU:
• “1010 Base cover assembly” on page 59
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or in sleep mode.
Removal steps of the 2242 M.2 solid-state drive
Step Screw (quantity) Color
Torque
1
M2 × L3 mm, flat-head, nylon-coated (2)
Black 0.294 Nm
(3.0 kgf-cm)
1030 Wireless-WAN card (for selected models)
For access, remove this FRU:
• “1010 Base cover assembly” on page 59
60
ThinkPad X1 Nano Gen 2 Hardware Maintenance Manual