Server User Manual

Notes:
•IfyouremovetheTPM,theTPMfunctionwillbeunavailable.
•UseanydocumentationthatcomeswiththeTPMandfollowthoseinstructionsinadditiontothe
instructionsinthistopic.
•Dependingonthemodel,yourservermightlookslightlydifferentfromtheillustrationinthistopic.
ToremovetheTPM,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Iftheserverisinstalledinarackcabinet,removetheserverfromtherackcabinetandplaceitonaat,
clean,andstatic-protectivesurface.SeetheRackInstallationInstructionsthatcomeswiththeserver.
3.Removetheservercover.See“Removingtheservercover”onpage69.
4.LocatetheTPMonthesystemboard.See“Systemboardcomponents”onpage31.IfthereisanyPCI
Expresscardinstalledontherisercardassembly1,itmightblockyouraccesstotheTPMconnectoron
thesystemboard.Inthiscase,youneedtoremovethecoolingshroudandthencarefullylifttheriser
cardassembly1upsothatyoucanaccesstheTPMconnector.Youdonotneedtodisconnectany
cablesfromthePCIExpresscardorcompletelyremovetherisercardassembly1.
Chapter6.Installing,removing,orreplacinghardware105