Manualshelf

User Guide

ManualsBrandsLenovo ManualsComputers & AccessoriesUSA ThinkPad Thunderbolt 3 Workstation USB Dock with 230w and 65w AC Included with Power Cords (MFG P/N ; 40AN0230US)
12345678910
1. Connect one end of the Thunderbolt 3 workstation cable to the dock.
2. Connect the other end of the Thunderbolt 3 workstation cable to the computer.
3. Connect the power cords to the ac power adapters.
4. Connect the 230-watt or 170-watt ac power adapter to the power connector
4a and the 65-watt
adapter to connector
4b .
5. Connect the power cords to electrical outlets.
Enable the dock
To enable the dock when connected to the computer for the first time, do either of the following:
• Confirm the change when prompted if you have the administrator privilege.
• Enter the ThinkPad Setup program (BIOS) and go to the Config menu. Select Thunderbolt(TM) 3 ➙
Security level ➙ No Security.
Install the device driver
The device driver is preinstalled on compatible Lenovo computers and the dock is ready for use after you
connect it to an ac power source and your computer.
You also can download the latest device driver from the Lenovo Web site by doing the following:
1. Go to
http://www.lenovo.com/support/docks.
2. Select the entry for the dock.
3. Follow the on-screen instructions to download and install the device driver.
6
ThinkPad Thunderbolt 3 Dock Gen 2 ThinkPad Thunderbolt 3 Workstation Dock User Guide