Lenovo IdeaPad Z710 ©Lenovo China 2013 en-US Rev. AA00 User Guide Read the safety notices and important tips in the included manuals before using your computer.
Notes • Before using the product, be sure to read Lenovo Safety and General Information Guide first. • Some instructions in this guide may assume that you are using Windows® 8. If you are using other Windows operating systems, some operations may be slightly different. If you are using other operating systems, some operations may not apply to you. • The features described in this guide are common to most models.
Contents Chapter 1. Getting to know your computer .......................................... 1 Top view .......................................................................................................................1 Left-side view ..............................................................................................................6 Right-side view............................................................................................................9 Front view .......................
Chapter 1. Getting to know your computer Top view --------------------------------------------------------------------------------------------------b a b c d e f g h Note: The dashed areas indicate parts that are invisible from outside. Attention: • Do not open the display panel beyond 130 degrees. When closing the display panel, be careful not to leave pens or any other objects in between the display panel and the keyboard. Otherwise, the display panel may be damaged.
Chapter 1. Getting to know your computer a Integrated camera Use the camera for video communication. b Wireless antennas Connect to the wireless adapter to receive and send wireless radio. c Built-in microphone Captures sound which can be used for video conferencing, voice narration, or audio recording. d Computer display Provides brilliant visual output. e Speakers Provide audio output. f Power button Press this button to turn on the computer.
Chapter 1. Getting to know your computer Using the keyboard Your computer has number keys and function keys and may also have a numeric keypad incorporated into its standard keyboard. Numeric keypad The keyboard has a separate numeric keypad. To enable or disable the numeric keypad, press the Num Lock key.
Chapter 1. Getting to know your computer Keyboard function keys You can access certain system settings quickly by pressing the appropriate function keys. 4 : Mutes/unmutes the sound. Enables/disables Airplane : mode. : Decreases the volume level. Displays all currently active : apps. : Increases the volume level. Turns on/off the backlight of : the LCD screen. Closes the currently active : window. Opens the interface for the display device switch to : select this notebook or an external display.
Chapter 1. Getting to know your computer Function key combinations Through the use of the function keys, you can change operational features instantly. To use this function, press and hold Fn a ; then press one of the function keys b . b a The following describes the features of each function key. Fn + Home: Activates the pause function. Fn + End: Activates the break function. Fn + PgUp: Enables/disables the scroll lock. Fn + PgDn: Activates the system request.
Chapter 1. Getting to know your computer Left-side view -------------------------------------------------------------------------------------- a b c d e f g a AC power adapter Connect the AC power adapter here. jack b Ventilation slots Dissipate internal heat. Note: Make sure that none of the ventilation slots are blocked, or else overheating of the computer may occur. c VGA port Connects to external display devices. d HDMI port Connects to devices with HDMI input such as a TV or a display.
Chapter 1. Getting to know your computer Connecting USB devices You can connect a USB device to your computer by inserting its USB plug (Type A) into the USB port on your computer. The first time you plug a USB device into a particular USB port on your computer, Windows automatically installs a driver for that device. After the driver is installed, you can disconnect and reconnect the device without performing any additional steps.
Chapter 1. Getting to know your computer Connecting a Bluetooth device If your computer has an integrated Bluetooth adapter card, it can connect to and transfer data wirelessly to/from other Bluetooth enabled devices, such as notebook computers, PDAs and cell phones. You can transfer data between these devices up to 10 meters range in open space. Note: The actual maximum range may vary due to interference and transmission barriers.
Chapter 1. Getting to know your computer Right-side view ---------------------------------------------------------------------------------- a b a Combo audio jack c d Connects to headsets. Notes: • By default, the combo audio jack does not support conventional microphones. • The recording function may not be supported if third-party headphones or headsets are connected, due to different industry standards. b USB port Connects to USB devices.
Chapter 1. Getting to know your computer Front view ----------------------------------------------------------------------------------------------- a a System status indicators Symbol Power indicator Battery status indicator Caps lock indicator Indicator status Meaning On (solid white) The computer is powered on. Blinking The computer is in sleep mode. Off The computer is powered off. On (solid white) The battery has more than 20% charge.
Chapter 1. Getting to know your computer Using memory cards (not supplied) Your computer supports the following types of memory card: • Secure Digital (SD) card • MultiMediaCard (MMC) Notes: • Insert only one card in the slot at a time. • This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.). Inserting a memory card Slide the memory card in until it clicks into place. Removing a memory card 1 Push the memory card in until you hear a click.
Chapter 1. Getting to know your computer Bottom view -----------------------------------------------------------------------------------------b d a c e a Battery latch manual The manual battery latch is used to keep the battery pack secured in place. b Battery pack c Battery latch spring loaded The spring-loaded battery latch keeps the battery pack secured in place. d Louvers Allow air to enter the computer for cooling.
Chapter 2. Starting to use Windows 8 Configuring the operating system for the first time -------------------------------------------------------------------------------------------------------------You may need to configure the operating system when it is first used.
Chapter 2. Starting to use Windows 8 The charms -------------------------------------------------------------------------------------------Charms are navigation buttons that let you access basic tasks quickly. Charms include: Search, Share, Start, Devices, and Settings. The charms bar is the menu that contains the charms. To display the charms bar, do one of the following: • Move the cursor to the upper-right or lower-right corner until the charms bar is displayed. • Press Windows key + C.
Chapter 2. Starting to use Windows 8 Share charm The Share charm lets you send links, photos, and more to your friends and social networks without leaving the app you are in. Start charm The Start charm is a fast way to go to the Start screen. Devices charm The Devices charm allows you to connect or send files to any external devices, including digital cameras, TVs, or printers. Settings charm The Settings charm lets you perform basic tasks, such as setting the volume or shutting down the computer.
Chapter 2. Starting to use Windows 8 Putting the computer to sleep or shutting it down -----------------------------------------------------------------------------------------------------------When you have finished working with your computer, you can put it to sleep or shut it down. Putting your computer to sleep If you will be away from your computer for only a short time, put the computer to sleep.
Chapter 2. Starting to use Windows 8 Shutting down the computer If you are not going to use your computer for a long time, shut it down. To shut down your computer: 1 Open the charms, select Settings 2 Select Power . → Shut down.
Chapter 2. Starting to use Windows 8 Connecting to a wireless network ------------------------------------Enabling wireless connection To enable wireless functions, do one of the following: • Press to disable airplane mode. • Open the charms and select Settings → to open the network configuration page. Then toggle the airplane mode switch to off.
Chapter 2. Starting to use Windows 8 Help and support ---------------------------------------------------------------------------If you have a problem with the operating system, see the Windows Help and Support file. To open the Windows Help and Support file, do one of the following: • Select Settings charm, then select Help. • Press Windows key + Fn + F1. You can read the Windows Help and Support file on your computer.
Chapter 3. Lenovo OneKey Recovery system The Lenovo OneKey Recovery system is software designed to back up and restore your computer. You can use it to restore the system partition to its original status in case of a system failure. You can also create user backups for easy restoration as required. Notes: • If your computer is preinstalled with a GNU/Linux operating system, OneKey Recovery system is not available.
Chapter 3. Lenovo OneKey Recovery system If Windows cannot be started, then follow the steps below to start the Lenovo OneKey Recovery system: 1 Shut down the computer. 2 Press the Novo button. From Novo Button Menu, select System recovery and press Enter.
Chapter 4. Troubleshooting Frequently asked questions -----------------------------------------------------------This section lists frequently asked questions by category. Finding information What safety precautions should I follow when using my computer? The Lenovo Safety and General Information Guide which came with your computer contains safety precautions for using your computer. Read and follow all the precautions when using your computer.
Chapter 4. Troubleshooting Lenovo OneKey Recovery system Where are the recovery discs? Your computer did not come with recovery discs. Use the Lenovo OneKey Recovery system if you need to restore the system to its factory status. What can I do if the back-up process fails? If you can start the backup but it fails during the back-up process, try the following steps: 1 Close all open programs, and then restart the back-up process. 2 Check to see if the destination media is damaged.
Chapter 4. Troubleshooting When do I need to change the boot mode? The default boot mode for your computer is UEFI mode. If you need to install a legacy operating system, such as Windows (that is, any operating system before Windows 8), Linux or Dos, etc on your computer, you must change the boot mode to Legacy Support. The legacy operating system, such as Windows, Linux or Dos, etc cannot be installed if you don't change the boot mode.
Chapter 4. Troubleshooting Troubleshooting -------------------------------------------------------------------------------------Display problems When I turn on the computer, nothing appears on the screen. • If the screen is blank, make sure that: - The battery is installed correctly. - The AC power adapter is connected to the computer, and the power cord is plugged into a working electrical outlet. - The computer power is on. (Press the power button again for confirmation.
Chapter 4. Troubleshooting BIOS password problems I forgot my password. • If you forget your user password, you must ask the system administrator to reset your user password. • If you forget your HDD password, a Lenovo authorized servicer cannot reset your password or recover data from the hard disk. You must take your computer to a Lenovo authorized servicer or a marketing representative to have the hard disk drive replaced. Proof of purchase is required, and a fee will be charged for parts and service.
Chapter 4. Troubleshooting The computer does not return from sleep mode, and the computer does not work. • If your computer is in sleep mode, connect the AC power adapter to the computer and then press any key or the power button. • If the system still does not return from sleep mode, stops responding, or cannot be turned off, reset the computer. Unsaved data may be lost. To reset the computer, press and hold the power button for 4 seconds or more.
Chapter 4. Troubleshooting Sound problems No sound can be heard from the speaker even when the volume is turned up. • Make sure that: - The Mute function is off. - The combo audio jack is not used. - The speaker is selected as the playback device. Battery problems Your computer shuts down before the battery status indicator shows empty. -orYour computer operates after the battery status indicator shows empty. • Discharge and recharge the battery.
Chapter 4. Troubleshooting Other problems Your computer does not respond. • To turn off your computer, press and hold the power button for 4 seconds or more. If the computer still does not respond, remove the battery pack and the AC power adapter. • Your computer might lock when it enters sleep mode during a communication operation. Disable the sleep timer when you are working on the network. The computer does not start from a device you want. • See the Boot menu of the BIOS setup utility.
Appendix. CRU instructions Note:Make sure the battery has been removed before replacing any devices. Replacing the battery ---------------------------------------------------------------------------Note:Use only the battery provided by Lenovo. Any other battery could ignite or explode. To replace the battery, do the following: 1 Turn off the computer. Disconnect the AC power adapter and all cables from the computer. 2 Close the computer display, and turn the computer over.
Appendix. CRU instructions Replacing the backup battery -----------------------------------------------------------To replace the backup battery, do the following: 1 Turn off the computer. Disconnect the AC power adapter and all cables from the computer. 2 Close the computer display, and then turn the computer over. 3 Remove the battery pack. 4 Remove the Hard disk drive/Memory/Mini PCI Express Card slot compartment cover. a.Loosen the screws that secure the compartment cover a . b.
Appendix. CRU instructions 5 Insert a screwdriver into the backup battery hole and prize up the backup battery so it pops out. 6 7 8 9 0 32 Install a new backup battery. Reinstall the compartment cover and tighten the screws. Reinstall the battery pack. Turn the computer over again. Connect the AC power adapter and the cables to the computer.
Appendix. CRU instructions Replacing the hard disk drive ----------------------------------------------You can increase the storage capacity of your computer by replacing the hard disk drive with one of greater capacity. You can purchase a new hard disk drive from your reseller or Lenovo marketing representative. Notes: • Replace the hard disk drive only if you upgrade it or have it repaired. The connectors and bay of the hard disk drive were not designed for frequent changes, or drive swapping.
Appendix. CRU instructions To replace the hard disk drive, do the following: 1 Turn off the computer. Disconnect the AC power adapter and all cables from the computer. 2 Close the computer display, and then turn the computer over. 3 Remove the battery pack. 4 Remove the Hard disk drive/Memory/Mini PCI Express Card slot compartment cover. a.Loosen the screws that secure the compartment cover a . b.Remove the compartment cover b .
Appendix. CRU instructions 5 Remove the frame fixing screws c . c c c c 6 Carefully remove the hard disk drive (secured in the metal frame) from the compartment d . d Note: Be sure to remove the hard disk (secured in the metal frame) gently to avoid breaking the connection to the SATA receptacle connector.
Appendix. CRU instructions 7 Hold the SATA receptacle connector with one hand and pull the hard disk drive (secured in the metal frame) in the direction shown below to detach it from the connector e . e 8 Remove the screws and detach the metal frame from the hard disk drive. 9 Attach the metal frame to a new hard disk drive and tighten the screws.
Appendix. CRU instructions Replacing memory -------------------------------------------------------------------------You can increase the amount of memory in your computer by installing a double-data-rate three low voltage synchronous dynamic random access memory (DDR3L SDRAM)-available as an option-in the memory slot of your computer. DDR3L SDRAMs are available in various capacities. Note: Use only the memory types supported by your computer.
Appendix. CRU instructions 6 If two DDR3L SDRAMs are already installed in the memory slot, remove one of them to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save the old DDR3L SDRAM for future use. b a a 7 Align the notch of the DDR3L SDRAM with the protrusion of the socket and gently insert the DDR3L SDRAM into the socket at a 30-45° angle.
Appendix. CRU instructions Note: If only one DDR3L SDRAM is used on the computer you are servicing, the card must be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot). b a To make sure that the DDR3L SDRAM is installed correctly, do as follows: 1 Turn the computer on. 2 Hold Fn + F2 during startup. The BIOS setup utility screen opens. The System Memory item shows the total amount of memory installed in your computer.
Appendix. CRU instructions Replacing the Mini PCI Express Card ---------------------------To replace the Mini PCI Express Card, do the following: 1 Turn off the computer. Disconnect the AC power adapter and all cables from the computer. 2 Close the computer display, and then turn the computer over. 3 Remove the battery pack. 4 Remove the Hard disk drive/Memory/Mini PCI Express Card slot compartment cover. a.Loosen the screws that secure the compartment cover a . b.Remove the compartment cover b .
Appendix. CRU instructions c d c 6 Remove the card in the direction shown by e . e 7 Align the contact edge of the new Mini PCI Express Card with the corresponding socket. 8 Pivot the card until you can snap it into place. Then secure the card with the screw. 9 Connect the antenna cables to the new Mini PCI Express Card. Be sure to attach the gray cable to the connector marked “MAIN” or “M” on the card, and the black cable to the connector marked “AUX” or “A”.
Appendix. CRU instructions 0 Reinstall the compartment cover and tighten the screws. A Reinstall the battery pack. B Turn the computer over again. C Connect the AC power adapter and the cables to the computer.
Appendix. CRU instructions Removing the optical drive ----------------------------------------------------To remove the optical drive, do the following: 1 Remove the Hard disk drive/Memory/Mini PCI Express Card slot compartment cover. 2 Remove the screw shown in the illustration a . 3 Gently pull the optical drive out b . a b The following table provides a list of CRUs (Customer Replaceable Units) for your computer, and informs you of where to find replacement instructions.
Trademarks The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. Lenovo IdeaPad OneKey Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, products, or service names may be trademarks or service marks of others.
Notes • Before using the product, be sure to read Lenovo Safety and General Information Guide first. • Some instructions in this guide may assume that you are using Windows® 8. If you are using other Windows operating system, some operations may be slightly different. If you are using other operating systems, some operations may not apply to you. • The features described in this guide are common to most models.
Lenovo IdeaPad Z710 ©Lenovo China 2013 en-US Rev. AA00 User Guide Read the safety notices and important tips in the included manuals before using your computer.