Users Manual

36
Appendix A. CRU instructions
4 IftwoDDR3SDRAMmodulesarealreadyinstalledinthememoryslot,
removeoneofthemtomakeroomforthenewonebypullingoutonthe
latchesonbothedgesofthesocketatthesametime.Besuretosavethe
oldDDR3SDRAMforfutureuse.
5 AlignthenotchoftheDDR3SDRAMmodulewiththeprotrusionofthe
socketandgentlyinsertthenewmoduleata30‐45°angle.
6 PushtheDDR3SDRAMmoduledownuntilthelatchesonbothsidesof
thesocketlockintoitsposition.
7 Afteraligningtheattachmentclipswith theirmatchinggaps,reinstallthe
bottomslotcover.
1 1
2
2
1