User's Manual

Table 3-2. Troubleshooting
Problem Possible cause Suggested action Reference
The power
indicator is
orange, but there
is no image.
The video signal cable
is loose or
disconnected from the
system or monitor.
Be sure the video cable is
connected with the
system properly.
"Connecting and
turning on your
monitor"on page 1-5
The monitor Adjust the brightness and "Adjusting your
brightness and contrast setting on the monitor image"on
contrast are at the OSD menu. page 2-3
lowest setting.
One or more of This is a characteristic If there are more than five Appendix A."Service
the pixels appear of the LCD pixels missing, contact and Support"on page
discolored. technology and is not
an LCD defect.
the Support Center. A-1
• Fuzzy lines
in text or a
blurry
image.
• Horizontal
or vertical
lines
through the
image.
• Image setup has
not been
optimized.
• Your system
Display
Properties setting
have not been
optimized.
Adjust the resolution
settings on your system
to match the native
resolution for this
monitor: 2560 x 1440 at 60
Hz.
"Adjusting your
monitor image"on
page 2-3
Perform automatic image
setup. If automatic image
setup does not help,
perform manual image
setup.
"Selecting a
supported display
mode"on page 2-8
When working in the
native resolution, you
may find additional
improvements by
adjusting the Dots Per
Inch (DPI) setting on your
system.
See the Advanced
section of your
system’s display
properties.
Chapter 3. 3-4