User's Manual

Chapter 1. 1-9

9. Insert the power cord into the monitor, then plug the monitor power cord and the computer

cord into grounded electrical outlets.

Note: A certied power supply cord has to be used with this equipment. The relevant

national installation and or equipment regulations shall be considered. A certied power

supply cord not lighter than ordinary polyvinyl chloride exible cord according to IEC

60227 (designation H05VV

-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 ) shall be used.

Alternative a exible cord be of synthetic rubber according to IEC 60245 (designation

H05RR-F 3G 0.75mm2 ) shall be used.

10. Connect the cables with cable clip.