User Manual

Table Of Contents

1-6 P27h-20 Flat Panel Monitor User’s Guide

Plug the monitor power cord and the computer cord into grounded electrical outlets.

Note: A certified power supply cord has to be used with this equipment. The relevant national

installation and/or equipment regulations shall be considered. A certified power supply cord not

lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation

H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be

of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.

Assembled cables with Line Cleaner as shown below.

Connect one end of the DP cable to the DP input on the back of another monitor, and the other end to the

DP output connector (for daisy chain) on the monitor.

Note 1: Monitors sold in NA include a DP cable

Note 2: For other regions Lenovo recommends that customers who require using the Display Port input

on their monitor purchase the "Lenovo Display Port to Display Port cable 0A36537".

For more information, go to the following: