User Manual
Table Of Contents
- Safety information
- Chapter 1. Getting started
- Chapter 2. Adjusting and using your monitor
- Chapter 3. Reference information
- Appendix A. Service and Support
- Appendix B. Notices
Chapter 1. 1-8
8. Insert the power cord into the monitor, then plug the monitor power cord and the computer
cord into grounded electrical outlets.
Note: A certied power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certied power
supply cord not lighter than ordinary polyvinyl chloride exible cord according to IEC
60227 (designation H05VV-F 3G 0.75mm
2
or H05VVH2-F2 3G 0.75mm
2
) shall be used.
Alternative a exible cord be of synthetic rubber according to IEC 60245 (designation
H05RR-F 3G 0.75mm
2
) shall be used.
Note: The type of plug & Socket shown here are for illustration only.
9. Connect the cables with cable clip.