User Manual

Chapter 1. 1-1
Chapter 1. Getting started
1
This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick
overview, please see the Setup Poster that was shipped with your monitor.
Shipping contents
The product package should include the following items:
y Flat Panel Monitor
y Information Flyer
y Stand
y Base
y DP Cable(Optional)
y USB C-C Cable
y USB C-A Cable(Optional)
y Power Cord
(WW)
(NA/LA)
(WW)
(NA/LA)
Notice for use
To set up your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be
damaged by rough handling or excessive pressure.
1. Carefully lay the monitor on a at surface.
2. Put the stand and base to the monitor.
Note: To attach a VESA mount, please see “Wall Mounting (Optional)”on page 2-9.
*: Depending on many factors such as the processingcapabilityof peripheral devices, le
attributes, and other factors related to system conguration and operating environments, the
actual transfer rate using the various USB connectors on this device will vary and is typically
slower thanthe data ratesas dened by the respective USB specications: - 5 Gbit/s for USB 3.1
Gen 1; 10 Gbit/s for USB 3.1 Gen 2 & 20 Gbit/s for USB 3.2.