User Manual

1 Flat Panel Monitor User’s Guide
Chapter 3.Reference information
This section contains monitor specications, instructions to manually install the monitor
driver, troubleshooting information.
Monitor specications
Table 3-1. Monitor specications for type-model 62C6-GAR1-WW /62C6-GCR1-CB
Dimensions Depth 173.10mm (6.81 in.)
Height 405.10mm (15.95 in.)
Width 489.30 mm (19.26 in.)
Stand Tilt Range: -5
o
~22
o
VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.)
Image Viewable image size 546.1 mm (21.5 in.)
Maximum height 476.064 mm (18.74 in.)
Maximum width 267.786 mm (10.54 in.)
Pixel pitch 0.24795 mm(0.01 in.)
Power input Supply voltage
Max supply current
100-240V AC
1.5A
Power consumption
Note: Power
consumption gures
are for the monitor
and the power supply
combined.
Note: Typical power
consumption is tested
under OSD default
setting.
Normal operation <19 W (Max)
<15 W (Typical)
Standby/Suspend <0.3 W
O <0.3 W at 100VAC and 240VAC
Video input HDMI
(Digital)
Interface HDMI
Input signal VESA TMDS (Panel Link™)
Horizontal addressability 1920 pixels (max)
Vertical addressability 1080 lines (max)
Clock frequency 165 MHz (max)
Video input VGA
(Digital)
Interface VGA
Input signal VESA TMDS (Panel Link™)
Horizontal addressability 1920 pixels (max)
Vertical addressability 1080 lines (max)
Clock frequency 205 MHz (max)