User Manual
Table Of Contents
- Chapter 1. Getting started
- Chapter 2. Explore your monitor
- Chapter 3. Troubleshooting
- Appendix A. Important safety information
- Safety information
- Maintenance
- Arranging your work area
- Positioning your monitor
- Tips for healthy work habits
- Accessibility information
- Register your monitor
- Online technical support
- Telephone technical support
- Recycling information
- Turkish statement of compliance
- Ukraine RoHS
- India RoHS
- Power cords and power adapters
- Trademarks
2-2 P27u-20 Flat Panel Monitor User’s Guide
OSD controls
The settings adjustable with the user controls are viewed through the On-Screen Display (OSD),
as shown below.
To use the controls:
1.
Press to open the main OSD menu.
2.
Use or to move among the icons. Select an icon and press to access that function.
If there is a sub-menu, you can move between options using or , then press to
select that function. Use or to make adjustments. Press to save.
3.
Press to move backwards through the sub-menus and exit from the OSD.
4.
Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow
adjustments to the OSD.
5.
Enables DDC/CI by default. Use OSD Exit Key, press and hold the buttons for 10
seconds to disable/enable DDC/CI function. The words " DDC/CI
Disable/DDC/CI/Enable" shows on the screen.
6.
The ENERGY STAR option resets all user settings to default values so that the monitor can
meet the requirements of Energy Star.