User Manual

Chapter 2. 2-3
Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Icon Control Description
1
Refresh Rate on
screen
Press and hold for 3 seconds to open/close Refresh Rate
on screen
Mode Switch Direct access to Mode Switch
2
Source-selecting Switches the video input source
Exit
Exit current OSD or return to previous level
Press and hold for 3 seconds to open the menu of Scaling
3
LightBalance Direct access to LightBalance adjustment
Increase/Up
Press to move lighting-indicator on main menu up from
active item to last one.
Press and hold for 3 seconds to Enable/Disable Over
Drive
Press to increase current values on adjustment bar.
4
Brightness Direct access to Brightness adjustment
Decrease/Down
Press to move lighting-indicator on main menu down
from active item to next one.
Press and hold for 10 seconds to Enable/Disable DDC/CI.
Press to decrease current values on adjustment bar.
5
Menu
Press to open main menu while there is no OSD on the
screen.
Press and hold for 10 seconds to lock/unlock all menu.
OK
Press to enter next level on main menu or sub menu, or
return back to previous level while on adjustment bar.