User Manual

Chapter 2. 2-4
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press
to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press
to access that function.
If there is a sub-menu, you can move between options using or , then press
to
select that function. Use or to make adjustments. Press
to save.
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
for 10 seconds to unlock the OSD and allow
adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold
for 10 seconds to
disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
Contrast 75
Color
Saturation 50
DCR
Low Blue Light
Brightness
Contrast
70
85
Brightness 80
1920x1080/60Hz/HDMI
Display overall settings
Lenovo Y44w