User Manual
Table Of Contents
- Lenovo ThinkSystem SR630 Server Product Guide
- Did you know?
- Key features
- Components and connectors
- System specifications
- Models
- Processors
- Memory
- Internal storage
- Controllers for internal storage
- Drives for internal storage
- Optical drives
- I/O expansion
- Network adapters
- SAS adapters for external storage
- Fibre Channel host bus adapters
- Flash storage adapters
- GPU adapters
- Cooling
- Power supplies and cables
- Systems management
- Security
- Rack installation
- Operating systems
- Physical specifications
- Operating environment
- Warranty
- Regulatory compliance
- External drive enclosures
- External storage systems
- Ethernet LAN switches
- Fibre Channel SAN switches
- Rack cabinets
- KVM switches and consoles
- Power distribution units
- Uninterruptible power supply units
- Lenovo Financial Services
- Related publications and links
- Related product families
- Notices
- Trademarks
The following tables list supported internal storage configurations with the SAS/SATA and AnyBay backplanes.
Table 14. Internal storage configurations
Drive bay configuration
Backplane kit
type and
quantity
Storage controller type and quantity*
4x 3.5" chassis (Feature code AUW2)
4x 3.5-in. SAS/SATA hot-swap (front) 1 0 0 0 1x RAID 530/730/930-8i (4)
1x 430-8i HBA (4)
8x 2.5" chassis (Feature code AUW0)
8x 2.5-in. SAS/SATA hot-swap (front) 0 1 0 0 1x RAID 530/730/930-8i (8)
1x 430-8i HBA (8)
10x 2.5" chassis (Feature code AUW1)
6x 2.5-in. SAS/SATA +
4x 2.5-in. AnyBay hot-swap (front)
0 0 1 0 1x RAID 930-16i (10) + Onboard NVMe (4)
1x 430-16i HBA (10) + Onboard NVMe (4)
6x 2.5-in. SAS/SATA +
4x 2.5-in. AnyBay hot-swap (front) +
2x 2.5-in. SAS/SATA hot-swap (rear)
0 0 1 1 1x RAID 930-16i (12) + Onboard NVMe (4)
1x 430-16i HBA (12) + Onboard NVMe (4)
* The number in brackets (x) specifies the quantity of drive bays connected to each of the controllers.
Configuration notes:
Models without any drive bays are based on the 8x 2.5" chassis (feature code AUW0), and they support
adding drive bays by using the 2.5" 8-drive backplane kit (7XH7A05896).
2x 2.5-inch rear drives are supported only on the models with 10x 2.5-inch hot-swap drive bays.
The 2.5" Rear HDD Kit is installed in place of the PCIe Riser Card 1; PCIe slots 1 and 2 are not
present.
The 2.5" Rear HDD Kit is supported only with the processors of up to 165 W TDP.
U.2 NVMe PCIe SSDs are supported in the AnyBay drive bays and require the second processor to be
installed.
4x 3.5" SATA/SAS
8x 2.5" SATA/SAS
10x 2.5" AnyBay
2x 2.5" Rear HDD
Lenovo ThinkSystem SR630 Server 24