User Manual

Emulex VFA5.2 2x10 GbE SFP+ Adapter and FCoE/iSCSI SW 00AG580 AT7T 2 / 3* 1, 2, 3
Intel X550-T2 Dual Port 10GBase-T Adapter 00MM860 ATPX 2 / 3 1, 2, 3
Intel X710-DA2 PCIe 10Gb 2-Port SFP+ Ethernet Adapter 7ZT7A00537 AUKX 2 / 3* 1, 2, 3
PCIe Full Height adapters - 10 Gb Ethernet
Emulex OCe14104B-NX PCIe 10Gb 4-Port SFP+ Ethernet Adapter 7ZT7A00493 AUKN 1 / 1* 2
PCIe Low Profile adapters - 25 Gb Ethernet
Broadcom NX-E P125e PCIe 25Gb 1-Port SFP28 Ethernet Adapter 7ZT7A00505 AUKS 2 / 3* 1, 2, 3
Mellanox ConnectX-4 Lx 2x25GbE SFP28 Adapter 01GR250 AUAJ 4 / 6* 1, 2, 3
PCIe Low Profile adapters - 40 Gb Ethernet
Mellanox ConnectX-4 Lx 1x40GbE QSFP28 Adapter 00MM950 ATRN 2 / 3* 1, 2, 3
PCIe x16 Low Profile adapters - 100 Gb Ethernet / EDR InfiniBand
Mellanox ConnectX-4 2x100GbE/EDR IB QSFP28 VPI Adapter 00MM960 ATRP 1 / 2* 2, 3
PCIe x16 Low Profile adapters - EDR InfiniBand
Mellanox ConnectX-4 EDR IB VPI Single-port x16 PCIe 3.0 HCA 00KH924 ASWQ 1 / 2* 2, 3
PCIe Low Profile adapters - Omni-Path
Intel OPA 100 Series Single-port PCIe 3.0 x8 HFA 00WE023 AU0A 1 / 2* 2, 3
Intel OPA 100 Series Single-port PCIe 3.0 x16 HFA 00WE027 AU0B 1 / 2* 2, 3
Description
Part
number
Feature
code
Max
qty#
I/O slots
supported
# The maximum quantity shown is with one processor / two processors (this does not apply to LOM cards and ML2 adapters).
* The adapter comes without transceivers or cables; for ordering transceivers or cables, see the configuration notes below the table.
Configuration notes:
ML2 network adapters are supported in the ML2 x8 slot 1 supplied by the x8ML2/x16 Riser Card 1
(7XH7A02683 or 7XH7A05894).
PCIe full-height network adapters are supported in the full-height PCIe x8 or x16 slot 2 supplied by the
riser card 1.
PCIe x16 Low Profile network adapters and Omni-Path adapters are supported in the full-height and low
profile PCIe x16 slots supplied by the riser cards 1 and 2.
PCIe Low Profile network adapters (except PCIe x16 adapters and Omni-Path adapters) are supported in
the full-height and low profile PCIe x8 and x16 slots supplied by the riser cards 1 and 2.
Some adapters require supported transceivers or DAC cables to be purchased for the adapter. The
maximum number of transceivers or cables that are supported per adapter equals the quantity of the
adapter ports, and all adapter ports must have the same type of the transceiver or cable selected.
The following transceiver and cables can be purchased:
Transceivers and cables for 10 GbE SFP+ adapters
Cables for 25 GbE SFP28 adapters
Transceivers and cables for 40 GbE QSFP28 adapters
Cables for Mellanox FDR InfiniBand QSFP adapters
Transceivers and cables for 100 GbE QSFP28 network adapters
Cables for Mellanox EDR InfiniBand QSFP28 adapters
Cables for Intel Omni-Path QSFP28 adapters
Lenovo ThinkSystem SR630 Server 32