User Manual
Boxed Processor Specifications
176 Intel
®
Xeon
®
Processor 5600 Series Datasheet Volume 1
Figure 9-8. Primary and Secondary Side 3D Height Restriction Zones
13
4
5678
B
C
D
A
123
4
5678
B
C
D
A
2200 MISSION COLLEGE BLVD.
P.O. BOX 58119
SANTA CLARA, CA 95052-8119
R
REVISION HISTORY
ZONE REV DESCRIPTION DATE APPROVED
-
A ORIGINAL RELEASE 09/29/06
-
B
M.B COMPONENT HEIGHT RESTRICTION
CHANGED FROM 2.5MM TO 7MM
10/05/06
C ADDED ADDITION KO FOR RM, SHEET 1 10/27/06
D
DRAWING RE-DO, ADDED BALL PATTERN, SOCKET
BODY, BALL 1, BACKSIDE WINDOW, GENERAL
DRAWING CLARIFICATIONS.
11/03/06
E UPDATED SOCKET KEEPIN OUTLINE TO REFLECT
RECENT CHANGES. SEE KEEPIN ZONE 1
OUTLINE, SHEETS 1 & 2.
11/30/06
2D3
2C1
F CORRECTED ILM HOLE DIAMETER. WAS SHOWING
RADIUS VALUE. 1.9 --> 3.8
UPDATED BACKPLATE HOLE DIAMTER SIZE FOR DT
COMPATIBILITY. DIAMETER 4.0 --> 4.03
12/18/06
G REMOVED 3.0 MM HEIGHT RESTRICTION ZONE
TO THE LEFT AND RIGHT OF SOCKET OUTLINE
01/12/07
1C6
1B5
2B8
2D6
2D4
H MOVED REVISION HISTORY TABLE TO SHEET 4
CORRECTED SOCKET SOLDERBALL ARRAY & POS
41.66 --> 40.64 (ARRAY SIZE)
44.85 --> 44.70 (ARRAY SIZE)
62.43 --> 62.39 (ARRAY POSITION)
19.17 --> 19.67 (ARRAY POSITION)
ADDED TOPSIDE CU PAD CALLOUT FOR ILM HOLES
SEE DETAIL A, SHEET 2
01/19/07
1C6
2D6
I REVERTED SOCKET SOLDERBALL ARRAY
X DIRECTION SIZE AND POSITION TO REV G.
40.64 --> 41.66 (ARRAY WIDTH)
19.67 --> 19.17 (ARRAY POSITION)
SOLDERBALL ARRAY OUTLINE REPRESENTS THE
CENTERLINE OF THE OUTER BALL ROWS/COLS
01/22/07
SHT 4
SHT 4
SHT 3
SHT 1
J ADDED ISO VIEW OF SECONDARY SIDE
MOVED ISO VEWS TO SHEET 4
MODIFIED BACKSIDE HEIGHT RESTRICTIONS FOR
NEW BACKPLATE GEOMETRY
ADDED NOTE 5 DETAILING HEIGHT RESTRICTION
NOMENCLATURE
REMOVED TOLERANCE BLOCK VALUES,
SEE NOTE 5
02/06/07
K UPDATED ZONE 1 KEEPOUT ON SHEETS 1 & 2
TO ALLOW MORE SOCKET LEVER ARM ACCESS,
LEFT SIDE OF ZONE
02/27/07
01 PRODUCTION RELEASE 08/02/07
02
ZONE 6 HEIGHT FROM 1.8MM --> 1.97MM
ADDED NOTE 7
02/24/09
D77712_THURLEY_KEEPOUT_PTMI 4 02
DWG. NO SHT. REV
THIS DRAWING CONTAINS INTEL CORPORATION CONFIDENTIAL INFORMATION. IT IS DISCLOSED IN CONFIDENCE AND ITS CONTENTS
MAY NOT BE DISCLOSED, REPRODUCED, DISPLAYED OR MODIFIED, WITHOUT THE PRIOR WRITTEN CONSENT OF INTEL CORPORATION.
SHEET 4 OF 4DO NOT SCALE DRAWINGSCALE: 2.500
EASD / PTMI
02
D77712_THURLEY_KEEPOUT_PTMID
REVDRAWING NUMBERSIZEDEPARTMENT
ALL ZONES, SEE NOTE 5
THIS HEIGHT REPRESENTS AN ARBITRARY
MOTHERBOARD THICKNESS
SECONDARY SIDE
3D HEIGHT RESTRICTION ZONES
PRIMARY SIDE
3D HEIGHT RESTRICTION ZONES