User Manual

Installation procedure
Troubleshooting
If the Chromebook does not start up after you reinstall the base cover assembly, disconnect the ac power
adapter and then reconnect it to the Chromebook .
Right I/O bracket
Prerequisite
Before you start, read
Generic Safety and Compliance Notices and print the following instructions.
For access, do the following:
1. Turn off the Chromebook and disconnect the Chromebook from ac power and all connected cables.
2. Close the Chromebook display and turn the Chromebook over.
3. Remove the base cover assembly. See “Base cover assembly” on page 18.
Chapter 3. CRU replacement 19