Owner's Manual
Table Of Contents
- About this manual
- Chapter 1. Safety information
- Chapter 2. General checkout
- Chapter 3. Identifying FRUs (CRUs)
- Chapter 4. Removing a FRU or CRU
- Service tools
- General guidelines
- Removal procedure for IdeaPad Flex 5 14IAU7 and IdeaPad Flex 5 14ALC7
- Remove the lower case
- Remove the battery pack
- Remove the solid-state drive (SSD)
- Remove the Wi-Fi card
- Remove the heat sink
- Remove the fan
- Remove the I/O board
- Remove the I/O board cable
- Remove the fingerprint board module
- Remove the speakers
- Remove the antenna
- Remove the touchpad cable
- Remove the system board
- Remove the touchpad
- Remove the LCD unit
- Remove the upper case
- Disassemble the LCD unit
- Removal procedure for IdeaPad Flex 5 16IAU7 and IdeaPad Flex 5 16ALC7
- Remove the lower case
- Remove the battery pack
- Remove the solid-state drive (SSD) module
- Remove the Wi-Fi card
- Remove the heat sink
- Remove the fan
- Remove the I/O board
- Remove the I/O board cable
- Remove the fingerprint board module
- Remove the speakers
- Remove the antenna
- Remove the touchpad cable
- Remove the touchpad
- Remove the system board
- Remove the LCD unit
- Remove the upper case
- Disassemble the LCD unit
- Appendix A. Label locations
- Trademarks
Table 7. FRU (CRU) categories
No.
FRU (CRU) category
1
LCD module
Note: The LCD module as a whole is not an FRU, it contains FRUs as its components.
2
Upper case
3
Fingerprint board bracket
4
Fingerprint board
5
Fingerprint board cable
6
I/O board
7
I/O board cable
8
Heat sink
9
Fan
10
Antenna
11
Speakers
12
Battery pack
13
Lower case
Tape
Rubber
Foil
14
Wi-Fi card
15
Solid-state drive (SSD) bracket
Note: The SSD bracket is used to lock the screw for the 2242 SSD.
16
2242 Solid-state drive (SSD)
17
2280 Solid-state drive (SSD)
18
Solid-state drive (SSD) thermal pad
19
System board
20
Touchpad cable
21
Touchpad
a
Power cord
b
ac power adapter
d
Screw kit
Chapter 3. Identifying FRUs (CRUs) 29