Owner's Manual

Table Of Contents

10. Reinstall all removed parts.

11. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables

to the computer.

Note: If a locking device is available, use it to lock the computer.

M.2 solid-state drive

Prerequisite

Before you start, read Generic Safety and Compliance Notices, and print the following instructions.

Attention: To replace the Optane memory in the M.2 solid-state drive slot, go to https://support.lenovo.com/

docs/tg_ssd

for details.

The following illustration shows the location of the M.2 solid-state drive on the system board.

Replacement procedure

1. Turn off the computer and remove all connected devices and cables.

IdeaCentre 5i (14L, 6), IdeaCentre 5 (14L, 6) User Guide