User Manual
Table Of Contents
Front bezel
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
2. Remove the power cord. See “Power cord” on page 14.
3. Remove the left computer cover. See “Left computer cover” on page 15.
4. Disconnect the top USB and audio assembly cable from the system board.
5. Remove the front bezel.
Chapter 4. CRU replacement 19