User Manual

M.2 solid-state drive
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
2. Remove the power cord. See “Power cord” on page 14.
3. Remove the right computer cover. See “Right computer cover” on page 17.
4. Remove the front bezel. See “Front bezel” on page 19.
5. Remove the screws to remove thermal pad from the M.2 solid-state drive.
6. Remove the screw from M.2 solid-state drive.
Chapter 4. CRU replacement 27