User Manual
Table Of Contents
PCI-Express card and card holder
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
2. Remove the left computer cover. See “Left computer cover” on page 15.
3. Remove the front bezel. See “Front bezel” on page 19.
4. Remove PCI-Express card connector cable, then remove two screws.
5. Remove three screws and disengage the latch. Then, remove the PCI-Express card and the holder from
the computer.
6. Remove two screws, then remove the holder from PCI-Express card.
Chapter 4. CRU replacement 33