Operation Manual

DEFAULT SETTINGS: You can select to enable data connection.
GENERAL SETTINGS: You can select to allow data roaming and show the roaming reminder.
WLAN
This setting allows you to enable/disable WLAN connections.
When WLAN is enabled, your tablet will automatically scan for available wireless networks, displaying them
in the WLAN network list.
The network status icon,
indicates that the network requires no password, and can be connected to
directly. However, indicates that the network has been encrypted, and can be connected to only
after the required password is entered.
You can select any network you want from the list. After selecting the network, tap Connect to connect
directly. Alternatively, select the check box in front of Show advanced options to adjust the proxy and IP
settings in the pop-up text box, and then tap Connect to connect to a network. You can also select
Add network to manually add a network.
Tap > WPS Pin Entry to use a PIN to add a WPS client.
Tap > WLAN Direct to allow applications to connect to nearby devices without needing to
connect to a network or hotspot.
Tap > Advanced for advanced WLAN settings.
Network notification: When activated, the system will notify you if there are any open net
works available.
Keep WLAN on during sleep: You can set WLAN connection policy during sleep mode to
Always, Only when plugged in or Never(increases data usage).
WLAN optimization: When activated, the system will minimize battery usage when WLAN is
on.