Datasheet
Intel® Xeon® Processor 7400 Series Datasheet 23
Electrical Specifications
2.9 Mixing Processors
Intel supports and validates multi-processor configurations only in which all processors
operate with the same FSB frequency, core frequency, number of cores, and have the
same internal cache sizes. Mixing components operating at different internal clock
frequencies or number of cores is not supported and will not be validated by Intel.
Note: Processors within a system must operate at the same frequency per bits [12:8] of the
CLOCK_FLEX_MAX MSR; however this does not apply to frequency transitions initiated
due to thermal events, Extended HALT, Enhanced Intel SpeedStep
®
technology
transitions, or assertion of the FORCEPR# signal (See Section 6).
Mixing processors of different steppings but the same model (as per CPUID instruction)
is supported. Details regarding the CPUID instruction are provided in the AP-485 Intel
®
Processor Identification and the CPUID Instruction application note.
2.10 Absolute Maximum and Minimum Ratings
Table 2-8 specifies absolute maximum and minimum ratings only, which lie outside the
functional limits of the processor. Only within specified operation limits, can
functionality and long-term reliability be expected.
At conditions outside functional operation condition limits, but within absolute
maximum and minimum ratings, neither functionality nor long-term reliability can be
expected. If a device is returned to conditions within functional operation limits after
having been subjected to conditions outside these limits, but within the absolute
maximum and minimum ratings, the device may be functional, but with its lifetime
degraded depending on exposure to conditions exceeding the functional operation
condition limits.
At conditions exceeding absolute maximum and minimum ratings, neither functionality
nor long-term reliability can be expected. Moreover, if a device is subjected to these
conditions for any length of time then, when returned to conditions within the
functional operating condition limits, it will either not function or its reliability will be
severely degraded.
Although the processor contains protective circuitry to resist damage from static
electric discharge, precautions should always be taken to avoid high static voltages or
electric fields.
.
Notes:
1. For functional operation, all processor electrical, signal quality, mechanical and thermal specifications must
be satisfied.
2. Storage temperature is applicable to storage conditions only. In this scenario, the processor must not
receive a clock, and no pins can be connected to a voltage bias. Storage within these limits will not affect
the long-term reliability of the device. For functional operation, please refer to the processor case
temperature specifications.
3. This rating applies to the processor and does not include any tray or packaging.
4. Failure to adhere to this specification can affect the long-term reliability of the processor.
Table 2-8. Processor Absolute Maximum Ratings
Symbol Parameter Min Max Unit Notes
1, 2
V
CC
Core voltage with respect to VSS -0.30 1.45 V
V
TT
FSB termination voltage with respect to
V
SS
-0.30 1.45 V
T
CASE
Processor case temperature See
Section 6
See
Section 6
°C
T
STORAGE
Storage temperature -40 85 °C3, 4, 5