Operation Manual

40
Appendix. CRU instructions
7 Remove the keyboard from the keyboard bezel and turn the keyboard
over.
8 Pull the keyboard connector slot cover upward as shown by arrow ,
and detach the keyboard cable from the keyboard connector in the
direction shown by arrow .
9 Install a new keyboard.
0 Connect the keyboard cable to the keyboard connector.
A Press the keyboard connector slot cover downward.
B Place the keyboard into the keyboard bezel, and close the computer dis-
play.
C Turn the computer over, reinsert and tighten the screw.
D Reinstall the compartment cover and tighten the screws.
E Reinstall the battery pack.
F Turn the computer over again.
G Connect the AC power adapter and the cables to the computer.
e
f
f
e