Operation Manual

The following table shows the options that you will see in the Options menu and
the default.
Item Description Default
Blank Screen Press the cursor left/right button
to select a background color for
blank screen.
Range:
Black/Red/Green/Blue/White
Blue
Auto Source Press the cursor left/right button
to enable or disable automatic
source detection.
Range: On/Off
On
Auto Power Off Press the cursor left/right button
to disable automatic shutdown of
lamp after 10 minutes of
inactivity.
Range: On/Off
Off
Volume Press the cursor left/button to
adjust the audio volume.
Range: 0 - 8
4
Menu Position Press the cursor left/right button
to position the OSD on screen.
Range:
Left/Right/Center/Down/Up
Center
Menu Display Press the cursor left/right button
to determine timeout delay of
OSD.
Range: 10-30 seconds
15 seconds
Translucent Menu Press the cursor up/down button
to set menu screen translucency.
Range: On/Off
Off
Cancel Resets Auto Power-Off, Volume,
Menu Position, Menu Display,
and Translucent Menu to default
values.
Not applicable
Setup menu
To access the View menu, follow the steps below:
1. Press the Menu button to open the main menu.
2. Press the left/right cursor to move to the Setup menu.
3. Press the cursor up/down button to move up and down in the Setup menu.
The Setup menu with a single input and the Setup menu with a dual input are
shown below.
Chapter 5. On-Screen Display menu controls 5-5