Operation Manual

Item Description Default
Video automatic gain control
(AGC)
Press the cursor right/left button
to enable or disable AGC for
video source.
Range: On/Off
On
Projection Press the cursor left/right button
to select from four projection
methods.
Range: Desktop mount, front of
screen/Desktop mount, rear of
screen/Ceiling mount, front of
screen/Ceiling mount, rear of
screen
Desktop mount,
front of screen
Frequency Press the cursor left/right button
to adjust the A/D sampling
clock.
Range: 0-100
Auto detected
Tracking Press the cursor left/right button
to adjust the A/D sampling
number.
Range: 0-100
Auto detected
Pip Size Press the cursor left/right button
to adjust the secondary image
size.
Note: Pip Size is only available
when the projector is connected
to dual input sources.
Range:
Off/Small/Medium/Large
Off
Pip Position Press the cursor left/right button
to adjust the secondary image
location.
Note: Pip Position is only
available when the projector is
connected to dual input sources.
Range: Upper left to lower right
Upper Left
Pip Input Press the cursor left/right button
to adjust the secondary image
source.
Note: Pip Input is only available
when the projector is connected
to dual input sources.
Range: Auto/Video/S-video
Auto
Cancel Resets Video Type, Video AGC,
and Projection to default values.
N/A
Information menu
To access the Information menu, follow the steps below:
1. Press the Menu button to open the main menu.
Chapter 5. On-Screen Display menu controls 5-7