Operation Manual

ManualsBrandsLenovo ManualsVideo projector projectorc400 dlp projector xga

Item

Description

IP

Address

State

Press

the

cursor

left/right

button

to

choose

between

Static

and

DHCP

settings.

In

Static,

the

user

can

enter

IP

Address,

Subnet

Mask,

Default

Gateway,

and

DNS

Server.

In

DHCP,

the

projector

will

have

IP

Address,

Subnet

Mask,

Default

Gateway,

and

DNS

Server

set.

Note:

The

default

setting

is

DHCP.

IP

Address

Press

the

cursor

up/down

button

to

change

the

IP

Address.

Note:

The

IP

address

can

only

be

changed

when

the

IP

Address

State

is

Static.

Subnet

Mask

Press

the

cursor

up/down

button

to

change

the

Subnet

Mask.

Note:

The

Subnet

Mask

can

only

be

changed

when

the

IP

Address

State

is

Static.

Default

Gateway

Press

the

cursor

up/down

button

to

change

the

Default

Gateway.

Note:

The

Default

Gateway

can

only

be

changed

when

the

IP

Address

State

is

Static.

DNS

Server

Press

the

cursor

up/down

button

to

change

the

DNS

Server

address.

Note:

The

DNS

Server

can

only

be

changed

when

the

IP

Address

State

is

Static.

Apply

Settings

Select

this

to

save

and

apply

the

settings.

Chapter

5.

On-Screen

Display

menu

controls

5-9