Specifications

Lenovo Flex 2 Pro-15/Edge 15

Thischapterpresentsthefollowinginformation:

• “RestoringthefactorycontentsbyusingRecoveryDiscSet”onpage23

• “Passwords”onpage24

• “Powermanagement”onpage25

Whentheharddiskdriveorsolidstatedriveisreplacedbecauseofafailure,no

productrecoveryprogramisonthenewdrive.Inthiscase,youmustusethe

RecoveryDiscSetforthecomputer.OrdertheRecoveryDiscSetandthedriveat

thesametimesothatyoucanrecoverthenewdrivewiththepre‐installed

softwarewhentheyarrive.

TheRecoveryDiscSetconsistsofthefollowingsetofDVDstorestorethe

computertotheoriginalfactoryconfiguration.

Start Recovery Disc (one disc)

Thisdiscisusedtoformattheharddiskdriveandinitiatetherecoveryprocess.

Operating System Recovery Disc (one or more discs)

ThisdiscrestorestheMicrosoftWindowsoperatingsystem.

Applications and Drivers Recovery Disc (one or more discs)

Thisdiscrestoresthepre‐installedapplicationsanddriversonthecomputer.

Supplemental Recovery Disc

Thisdisccontainsadditionalcontent,suchassoftwareforspecificmodelsand

updatestothesoftwarethatwaspreloadedonthecomputer.Notallrecovery

discsetscomewithaSupplementalRecoveryDisc.

Torestorethecomputertotheoriginalfactoryconfigurationusingtherecovery

discset,dothefollowing:

1. InsertthebootableStartRecoveryDiscintotheopticaldrive.

2. Startthecomputer.WhentheLenovologocomesup,immediatelypressF12;

onthebootsequencemenu,selecttheopticaldriveasthefirstboot‐updevice.

ThecomputerwillbootfromtheStartRecoveryDisc.Followtheon‐screen

instructionstobegintherecoveryprocess.

3. Readthelicense.Ifyouagreewiththeterms,selectIacceptthesetermsand

conditionsandthenclickNext.

4. InserttheOperatingSystemRecoveryDiscwhenpromptedandclickYesto

begintheoperatingsystemrecoveryprocess.

5. InserttheApplicationsandDriversRecoveryDiscwhenpromptedandthen

clickOKtobegintheapplicationsanddriversrecoveryprocess.

6. IfyouhaveaSupplementalRecoveryDisc,insertitwhenpromptedandclick

Yes.IfyoudonothaveaSupplementalRecoveryDisc,clickNo.

Related service information

Restoring the factory contents by using Recovery Disc Set