Lenovo IdeaPad Flex 10 Hardware Maintenance Manual
Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 63. First Edition (Sep. 2013) © Copyright Lenovo 2013. All rights reserved. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
Contents About this manual........................................ iv Safety information......................................... 1 General safety................................................. 2 Electrical safety............................................... 3 Safety inspection guide................................... 5 Handling devices that are sensitive to electrostatic discharge..................................... 6 Grounding requirements..................................
About this manual This manual contains service and reference information for the following Lenovo product: Lenovo IdeaPad Flex 10 Use this manual to troubleshoot problems. The manual is divided into the following sections: • The common sections provide general information, guidelines, and safety information required for servicing computers. • The product-specific section includes service, reference, and product-specific parts information.
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo IdeaPad Flex 10 computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14 1
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4.
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. Do not use such kind of mat to protect yourself from electrical shock.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage.
Safety information Safety inspection guide The purpose of this inspection guide is to assist you in identifying potential unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards according to the attachment of non-Lenovo features or options not covered by this inspection guide.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1.
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or shortcircuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery.
Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignition or explosion of the battery. La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery.
Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au moins quinze minutes.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen.
Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products.
Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Important service information This chapter presents the following important service information: • “Strategy for replacing FRUs” on page 16 – “Strategy for replacing a hard disk drive” on page 17 – “Important notice for replacing a system board” on page 17 • “Important information about replacing RoHS compliant FRUs” on page 18 Important: BIOS and device driver fixes are customer-installable.
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts.
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • Carefully remove screws for reuse when replacing FRUs.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8.
General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Connect the AC adapter. 3. Make sure that power is supplied when you turn on the computer. 4. Turn off the computer. 5. Disconnect the AC adapter. 6. Make sure that the battery pack supplies power when you turn on the computer.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Perform operational charging. If the battery status indicator or icon is not lit, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator is still not lit, replace the system board.
Related service information Related service information This chapter presents the following information: • “Restoring the factory contents by using Recovery system” on page 23 • “Passwords” on page 24 • “Power management” on page 25 Restoring the factory contents by using Recovery system Restore of factory default The Lenovo IdeaPad Flex 10 computer comes with pre-installed Recovery System.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Passwords As many as three passwords may be needed for any Lenovo computer: the power-on password (POP), the hard disk password (HDP), and the supervisor password. If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered. Power-on password A power-on password (POP) protects the system from being powered on by an unauthorized person.
Related service information Power management Note: Power management modes are not supported for an APM operating system. To reduce power consumption, the computer has two power management modes: screen blank and sleep (standby). Screen blank state If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. You can also turn off the LCD backlight by . pressing To end screen blank state and resume normal operation, press .
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Shutting down the computer If you are not going to use your computer for a long time, shut it down. To shut down your computer: • Open the charms, then select Settings → Power → Shut down. • Right-click the Windows icon on the desktop lower-left corner. Then select Shut down from the Shut down menu options.
Lenovo IdeaPad Flex 10 Lenovo IdeaPad Flex 10 This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 27 • “Status indicators” on page 29 • “Fn key combinations” on page 30 • “FRU replacement notices” on page 31 • “Removing and replacing an FRU” on page 32 • “Locations” on page 49 • “Parts list” on page 51 Specifications The following table lists the specifications of the Lenovo IdeaPad Flex 10: Table 1.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Table 1. Specifications (continued) Feature Description Audio • Combo audio jack • Integrated Speakers Stereo × 2 • Built-in microphone × 1 PCI Express Mini Card slot Bluetooth wireless Keyboard Touch pad Integrated camera Battery AC adapter Pre-installed operating system 28 • 1 slot • Only support BT&WIFI combo module • 6-Row, Lenovo Keyboard • One piece touchpad • 1.
Lenovo IdeaPad Flex 10 Status indicators The system status indicators below show the computer status: 1 Table 2. Status indicators Indicator Indicator status On (white) Battery status indicator Charge status Charging Discharging On (amber) Discharging Blinking (white) Charging Blinking slowly (amber) Blinking quickly (amber) Off Charging Discharging/ Charging Discharging Meaning The battery’s charge is greater than 80%. The battery’s charge is greater than 20%.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Fn key combinations The following table describes the functions of Fn key combinations. Table 3. Function key combinations : 30 Mutes/unmutes the sound. : Decreases the volume level. : Increases the volume level. : Closes the currently active window. : Refreshes the desktop or the currently active window. : Enables/disables the touchpad. : Enables/disables Airplane mode. : Displays all currently active apps.
Lenovo IdeaPad Flex 10 FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration. • They are harder to tighten.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 31. 3.
Lenovo IdeaPad Flex 10 1010 Base cover Figure 1. Removal steps of base cover Open the two foot rubbers in the direction shown by arrows screws 2. Then remove the base cover 3. 2 2 2 3 2 1 2 2 2 2 1 Step 2 1 and remove the 2 Screw (quantity) Color Torque M2 × 6 mm, flat-head, nylok-coated (9) Lower to Upper Black 1.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels: The following labels need to be peeled off from the old base cover and put on the new base cover. a Wlan + BT label b Indonesia label c KCC label d Print label e Rating label f Win8 GML label For some models, you also need to apply one or two FCC labels.
Lenovo IdeaPad Flex 10 1020 Battery pack For access, remove this FRU: • “1010 Base cover” on page 33 DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. Figure 2. Removal steps of battery pack Unplug the battery connector battery pack 3. 1 and remove the screw 2. Then remove the 1 2 3 Step 2 Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (1) Bty to Upper Black 1.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual 1030 Keyboard For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 35 Figure 3. Removal steps of keyboard Remove the screws 1 on the bottom. 1 1 1 Step 1 36 1 Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (4) Lower to Keyboard Black 1.
Lenovo IdeaPad Flex 10 Figure 3. Removal steps of keyboard (continued) Push the back of the keyboard in the direction shown by arrow keyboard with fingers in the direction shown by arrow 3. 2. Loosen the 2 3 Lift the keyboard a little 4, and then detach the connectors in the direction shown by arrows 5 and 6. Then remove the keyboard.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual 1040 Hard disk drive For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 35 Figure 4. Removal steps of hard disk drive Remove the screws 1. Detach the HDD connector and then remove the hard disk drive from the slot in the direction shown by arrows 2 and 3. 1 1 1 3 2 Step 1 Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (3) HDD BKT to BASE Black 1.
Lenovo IdeaPad Flex 10 1050 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 35 Figure 5. Removal steps of PCI Express Mini Card for wireless LAN Disconnect the two wireless LAN cables (black, grey) screw 2.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Figure 5. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow 3. 3 When installing: When installing the wireless LAN card, plug the black cable into the jack labeled MAIN and the grey cable into the jack labeled AUX.
Lenovo IdeaPad Flex 10 1060 Heat sink For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 35 Figure 6. Removal steps of heat sink Remove the screws 1. Lift the heat sink in the direction shown by arrows 2. 1 2 1 1 1 1 1 2 Step 1 Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (6) Heat sink to Upper/MB Black 1.35 kgf*cm Attention: Do not handle the heat sink assembly roughly.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual 1070 Power button & USB board For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 35 • “1060 Heat sink” on page 41 Figure 7. Removal steps of power button & USB board Detach the connector in the directions shown by arrows 1 and 2. Remove the screw 3, then remove the power button & USB board in the direction shown by arrow 4.
Lenovo IdeaPad Flex 10 1080 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • During the whole process, make sure not to drop or stack the system board.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Figure 8. Removal steps of system board (continued) Detach the connectors in the direction shown by arrows the screws 4. Then remove the system board 5. 1, 2 and 3, remove 1 4 5 4 1 4 2 3 1 Step 4 44 Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (3) MB to Upper Black 1.
Lenovo IdeaPad Flex 10 1090 Microphone For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 35 • “1030 Keyboard” on page 36 • “1040 Hard disk drive” on page 38 • “1050 PCI Express Mini Card for wireless LAN” on page 39 • “1060 Heat sink” on page 41 • “1070 Power button & USB board” on page 42 • “1080 System board” on page 43 Figure 9. Removal steps of microphone Remove the microphone in the direction shown by arrow 1.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual 1100 LCD unit For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 35 • “1030 Keyboard” on page 36 • “1040 Hard disk drive” on page 38 • “1050 PCI Express Mini Card for wireless LAN” on page 39 • “1060 Heat sink” on page 41 • “1070 Power button & USB board” on page 42 • “1080 System board” on page 43 • “1090 Microphone” on page 45 Figure 10. Removal steps of LCD unit Remove the two screws 1 on the upper case.
Lenovo IdeaPad Flex 10 Figure 10. Removal steps of LCD unit (continued) Remove the screws 2. 2 2 2 2 Step 2 Screw (quantity) Color Torque M2 × 4 mm, flat-head, nylok-coated (4) Hinge to Upper Black 1.5 kgf*cm Open the hinges 3, then remove the upper case from the LCD unit 4 and 5.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Figure 10.
Lenovo IdeaPad Flex 10 Locations Front view and right-side view Integrated camera (on select models) Wireless LAN antennas Wireless WAN antennas (on select models) Multi-touch screen Windows button Touchpad Volume button Power button Battery status indicator Note: For the description of each indicator, see “Status indicators” on page 29.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Bottom and Left-side view 1 2 3 4 5 6 Speakers Combo audio jack USB port HDMI port AC power adapter jack Built-in microphone 1 6 1 50 2 3 4 5
Lenovo IdeaPad Flex 10 Parts list This section presents the following service parts: • “Overall” on page 52 • “Keyboard” on page 54 • “Miscellaneous parts” on page 58 • “Screws” on page 58 • “AC adapters” on page 59 • “Power cords” on page 60 Note: Each FRU is available for all types or models, unless specific types or models are specified.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Overall 1 2 3 b 4 5 7 c 6 8 9 a 10 11 52
Lenovo IdeaPad Flex 10 Table 4. Parts list—Overall No. FRU a-c 1 1 2 3 3 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 7 8 8 9 9 9 9 9 9 10 11 11 — See “Miscellaneous parts” on page 58. Flex10 LCD Module Black Flex10 LCD Module Brown Keyboard (see “Keyboard” on page 54.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Keyboard Table 5. Parts list—Keyboard Language P/N Chicony Black key / Grey frame Sunrex 54 English U.K. English Italian Spanish Turkish Thai Portuguese Latin Canadian Bilingual (En+Fr) Korean Traditional Chinese Russian French German Arabic Brazilian Japanese Dutch Greek Hebrew Hungarian Nordic Belgian Icelandic Slovenian Swiss US international Czech&Slovak Bulgarian Indic English U.K.
Lenovo IdeaPad Flex 10 Table 5. Parts list—Keyboard (continued) Language P/N Sunrex (continued) Black key / Grey frame (continued) Dafon Black key / Chicony Black frame CRU ID. Dutch 25212926 N Greek 25212927 N Hebrew Hungarian Nordic Belgian Icelandic Slovenian Swiss US international Czech&Slovak Bulgarian Indic English U.K.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Table 5. Parts list—Keyboard (continued) Language P/N Chicony (continued) Black key / Black frame (continued) Sunrex 56 Spanish Turkish Thai Portuguese Latin Canadian Bilingual (En+Fr) Korean Traditional Chinese Russian French German Arabic Brazilian Japanese Dutch Greek Hebrew Hungarian Nordic Belgian Icelandic Slovenian Swiss US international Czech&Slovak Bulgarian Indic English U.K.
Lenovo IdeaPad Flex 10 Table 5. Parts list—Keyboard (continued) Language P/N Sunrex (continued) Black key / Black frame (continued) Dafon Nordic Belgian Icelandic Slovenian Swiss US international Czech&Slovak Bulgarian Indic English U.K.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Miscellaneous parts Table 6. Parts list—Miscellaneous parts FRU FRU no. System miscellaneous part: • (a ) Flex10 HDD Bracket 90204587 Cable miscellaneous parts: 90204589 • (b) Flex10 TouchPad Board Cable 90204588 • (c) Flex10 Power Button Board Cable Note: Italicized letters in parentheses are references to the exploded view in “Overall” on page 52. CRU ID. N Screws Table 7. Parts list—screws 58 FRU P/N Flex10 Screw M2 × L3 D4 T0.
Lenovo IdeaPad Flex 10 AC adapters Table 8. Parts list—AC adapters FRU P/N CRU ID. Adapter, 45w AC Adapter (3Pin) 20V + Rectangle plug, Delta ADLX45NDC3A 20V2.25A adapter Adapter, 45w AC Adapter (3Pin) 20V + Rectangle plug, Liteon ADLX45NLC3A 20V2.25A adapter Adapter, 45w AC Adapter (3Pin) 20V + Rectangle plug, Chicony ADLX45NCC3A 20V2.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 9. Parts list—3-pin power cords 60 Region P/N UK • LINETEK LP-61L+ H03VV-F+ LS15 1m UK • Longwell LP-61L+H03VV-F+LS-18 1m UK • VOLEX MP5004+H03VV-F+VAC5S 1m UK • lux 0031+H03VV-F 0.
Lenovo IdeaPad Flex 10 Table 9. Parts list—3-pin power cords (continued) Region P/N Japan • Longwell LP-54+VCTF+LS-18 1m Japan • VOLEX VAC5S+VCTF+M755 1m Japan • lux 0018(E)+VCTF 0.75/3C+0021 1m Australia • LINETEK LS15+H03VV-F+LP-23A 1m Australia • Longwell LP-23A+LFC-3R+LS-18 1m Australia • VOLEX AU10S3+H03VV-F+VAC5S 1m Australia • lux 0038+H03VV-F 0.75/3C+0011 1m Taiwan • LINETEK LS15+VCTF+LP-53 1m Taiwan • Longwell LP-71+VCTF+LS-33 1m Taiwan • VOLEX TW15CS3+VCTF+VAC5S 1m Taiwan • lux 0019+VCTF 0.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Table 9. Parts list—3-pin power cords (continued) 62 Region P/N Brazil • LINETEK LS15 H03VV-F LP26A 1m Brazil • Longwell LP-46+H03VV-F+LS-18 1m Brazil • VOLEX CH10S3+H03VV-F+VAC5S 1m Brazil • lux 0034+H03VV-F 0.75/3C+0011 1m Israel • LINETEK LS15+H03VV-F+LP-41 1m Israel • Longwell LP-41+H03VV-F+LS-18 1m Israel • VOLEX SI16S3+H03VV-F+VAC5S 1m Israel • lux 0041+H03VV-F 0.
Notices Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary.
