Machine type: 10093/2561/4746 10107/3230 10118/6286 10119/6287 10126/90A5 10131/90A9 10132/90AB [H520s] [H505s] [H535s ES] [H535s Non-ES] [H515s] [H530s ES] [H530s Non-ES] H5s Series User Guide Version 1.0 2013.
Important Safety Information Before using this manual, it is important that you read and understand all of the related safety information for this product. Refer to the Safety and Warranty Guide that you received with this product for the latest safety information. Reading and understanding this safety information reduces the risk of personal injury or product damage. The interface and functions shown in this User Guide are provided for reference only and may differ from actual product appearance.
Contents Important Safety Information Using the Computer Hardware.................................................. 1 Front view of the chassis.............................................................................2 Rear view of the chassis..............................................................................3 Basic connector instructions.......................................................................8 Connecting your computer............................................................
Troubleshooting and Confirming Setup.................................. 25 Troubleshooting Display Problems.............................................................26 Troubleshooting Audio Problems...............................................................27 Troubleshooting Software Problems..........................................................28 Troubleshooting Problems with Optical Drives and Hard Disks..................28 Special considerations for troubleshooting Windows......................
Using the Computer Hardware This chapter contains the following topics: Introduction to the computer hardware Information on computer connections Note: The descriptions in this chapter might be different from what you see on your computer, depending on the computer model and configuration.
Front view of the chassis Attention: Be careful not to block any air vents on the computer. Blocked air vents can cause overheating. Power button Memory card reader (selected models only) USB connectors Optical drive eject button Headphone connector Optical Drive (selected models only) Hard disk drive indicator Microphone connector Note: This computer only can be placed in a vertical position. Attention: Do not insert 3-inch discs into the optical drive.
Rear view of the chassis (If the rear view configuration shown in this chapter is different from the rear of your computer, please refer to the rear of your computer.) Lenovo H505s On-board VGA connector WiFi antenna (selected models only) HDMI connector (selected models only) USB 2.0 connectors USB 3.
Lenovo H515s On-board VGA connector WiFi antenna (selected models only) HDMI connector (selected models only) USB 2.0 connectors USB 3.0 connectors Ethernet connector Audio connectors Power connector Cable clip PCI Express X 16 graphics adapter slot (some models are equipped with a graphics card) PCI Express X 1 adapter slot (some models are equipped with USB 3.
Lenovo H520s USB connectors WiFi antenna (selected models only) HDMI connector (selected models only) On-board VGA connector Ethernet connector Audio connectors PCI Express X 16 graphics adapter slot (some models are equipped with a graphics card) PCI Express X 1 adapter slot (some models are equipped with USB 3.
Lenovo H530s HDMI connector (selected models only) WiFi antenna (selected models only) On-board VGA connector USB 3.0 connectors USB 2.0 connectors Ethernet connector Audio connectors PCI Express X 16 graphics adapter slot (some models are equipped with a graphics card) PCI Express X 1 adapter slot (some models are equipped with USB 3.
Lenovo H535s 11 12 USB 2.0 connectors WiFi antenna (selected models only) HDMI connector (selected models only) On-board VGA connector USB 3.0 connectors USB 2.0 connectors Ethernet connector Audio connectors PCI Express X 16 graphics adapter slot (some models are equipped with a graphics card) PCI Express X 1 adapter slot (some models are equipped with USB 3.
Note: If your model has two VGA monitor connectors, be sure to use the connector on the graphics adapter. Attention: Do not open the WiFi antenna cover. Basic connector instructions Note: Your computer may not have all of the connectors described in this section. Connector Description Microphone Use this connector to attach a microphone to your computer when you want to record sound or if you use speech-recognition software.
DVI connector Used to attach a DVI monitor or other devices that use a DVI monitor connector. HDMI connector (optional) Connect to the HDMI connector on your display or TV. TV-Tuner connector (optional) Only supported on systems with an optional TV tuner card. Note: If your computer is equipped with a wireless keyboard or mouse, follow the installation instructions for those devices. Connecting your computer Use the following information when connecting your computer.
5.1 Audio configuration instructions This model of computer supports the transformation of stereo sound into 5.1 surround sound. Use the following guides when connecting to the 5.1 surround audio device: Blue line-in connector Surround Green line-out connector Front channel Pink Mic-in connector Center-LFE The configurations are as followings: 1. Right click the Sound icon in system property bar and select Playback devices option to setup the sounds in the pop-up dialog box. 2.
Connecting the power cord Connect the power cord to an electrical outlet. We recommend using a grounded connection or a surge protector. Some models are equipped with Power Adapter.
Display connecting instructions when playing Blu-ray Discs Note: Only some models are equipped with Blu-ray optical drive. Check the connectors available on your computer and display and select an appropriate cable according to the table below. Other types of cables do not meet the requirements of the Blu-ray standard. You need to purchase the cable separately if the computer is not equipped with the corresponding cable. This table will help you to identify the connectors on your computer and display.
Wireless network connection For wireless networks, you can use the built-in wireless LAN antenna to access your wireless home network. To connect your computer to the wireless network: 1. Move the cursor to the top right or bottom right corner of the screen, then click Settings. (If your computer is equipped with touch screen, swipe in from the right edge of the screen, then tap Settings.) 2. Click or tap the network icon , then select the name of your router.
14 User Guide
Using Windows 8 This chapter contains the following topics: Switching between the main Windows 8 interfaces The Charms Bar Shutting down the computer Switching between apps Closing an app Opening other system programs Windows Help and Support Attention: The Windows 8 operating system is provided by Microsoft Corporation. Please use it in accordance with the END USER LICENSE AGREEMENT (EULA) between you and Microsoft.
Switching between the main Windows 8 interfaces Windows 8 comes with two main user interfaces: the Start Screen and the Windows desktop. To switch from the Start Screen to the Windows desktop, do one of the following: • Select the Windows desktop tile on the Start Screen. • + D. Press the Windows key To switch from the desktop to the Start Screen, do one of the following: • Select Start from the Charms Bar.
Switching between apps Sometimes you want to get back to an app you were just using, or quickly switch through your recent apps. To switch between apps: Move the cursor to the top left corner, then click to bring in the next app. (If your computer is equipped with touch screen, swipe in from the left edge of the screen to bring in the next app.) Closing an app To close an app, do one of the following: • Move the cursor to the top left corner of the screen.
18 User Guide
Using the Rescue System This chapter contains the following topics: OneKey Recovery Driver and Application Installation Attention: Using OneKey Recovery will result in loss of data. • You can restore the C: drive of the computer to factory default settings or to the last system backup status using OneKey Recovery. If you do this, all of the existing data on drive C: will be lost, but the content and format of the other partitions of the hard disk drive will remain unchanged.
Note about the service partition: The files and relevant data used by the rescue system are saved in the service partition. Deleting this partition will make the rescue system unusable. For more detailed information, see the following instructions: From the Search charm, select Apps → Control Panel → Administrative Tools → Computer Management → Disk Management, you can see the service partition, which must not be deleted.
Driver and Application Installation The Driver and Application Installation function in the rescue system provides a way for the user to conveniently reinstall all of the Lenovo applications and drivers that were shipped with your Lenovo hardware. Method 1: Automatic Installation Repeatedly press and release the F2 key once turning on the computer until the Lenovo Rescue System opens, then select Drivers and Application Installation.
22 User Guide
Using the Software This chapter contains the following topic: Software instructions Note: The interface and functionality of these features will depend on which software was shipped with the computer model you purchased.
Lenovo Support The Lenovo Support program enables you to register your computer with Lenovo, download and view user manuals for your computer, get the warranty information of your computer, and explore help and support information. To open this program, do the following: Click the Lenovo Support icon from the Start Screen or Search Screen. The main functions of this program are listed below. (This program supports online upgrades.
Troubleshooting and Confirming Setup This chapter contains the following topic: Troubleshooting and Problem Resolution User Guide 25
Solving Problems Follow these tips when troubleshooting your computer: • If you added or removed a part before the problem started, review the installation procedures to ensure that the part is correctly installed. • If a peripheral device does not work, ensure that the device is properly connected. • If an error message appears on the screen, write down the exact message. This message may help support personnel diagnose and fix the problem(s).
Problem: Ripple on screen. Troubleshooting and problem resolution: 1. Check to see if any of the following devices are located less than one meter from the computer: refrigerators, electric fans, electric dryers, UPS systems, regulators, fluorescent lamps or other computers that may be generating magnetic interference. 2. Move any interfering devices away from the computer. 3. If the problem persists, contact Lenovo Service. Troubleshooting Audio Problems Problem: No sound from the integrated speakers.
Troubleshooting Software Problems Problem: You are unable to exit a running program normally. Troubleshooting and problem resolution: 1. Press the Ctrl, Alt and Delete keys at the same time, then select the Task Manager option from the pop-up dialog box. 2. Select the problem program, then click the End Task button. Problem: You need to install or uninstall a program. Problem resolution: During installation never abort the install process by powering the system off or through other drastic means.
2. Confirm that the CD/DVD has been properly placed in the drive. If not, reload the CD or DVD. Otherwise, continue with the next step of this procedure. 3. Check the specifications that came with your computer to confirm that this optical drive is capable of reading this type of CD or DVD. 4. If the CD/DVD cannot be read, replace it with a known good CD/DVD such as one that was shipped with the computer. 5. If the known good CD cannot be read, visually check the operating side of the CD/DVD for defects.
Windows Help and Support If you have a problem with the operating system, see the Windows Help and Support file. To open the Windows Help and Support file, do one of the following: • Select the Settings charm, then select Help. • Press Windows key + F1. You can read the Windows Help and Support file on your computer. You can also get online help and support by clicking on one of the two links listed under More to explore.
Performing Daily Maintenance Tasks Cleaning the computer components Because many of the computer components consist of sophisticated integrated circuit boards, it is very important to periodically clean the computer to prevent dust buildup. The cleaning supplies you need to clean the components include: a vacuum cleaner, a soft cotton cloth, pure water (preferably purified or distilled water) and cotton swabs. Attention: Before you clean your computer, disconnect the computer from the electrical outlet.
32 User Guide
Hardware Replacement Guide This chapter contains the following topics: Identifying internal components Identifying parts on the system board Removing the computer cover Removing the front bezel Replacing a memory module Replacing a hard disk drive Replacing an optical drive Replacing the keyboard and mouse User Guide 33
Overview This guide is intended to be used by customers who are replacing Customer Replaceable Units (CRUs) as well as trained service personnel who are replacing Field Replaceable Units (FRUs). In this guide, CRUs and FRUs will often be referred to as parts. Note: Trained service personnel should refer to the Hardware Maintenance Manual (HMM) for parts ordering information. This guide does not include procedures for all parts.
Additional information resources If you have Internet access, the most up-to-date information for your computer is available from the World Wide Web. You can find the following information: • CRU removal and installation information • Publications • Troubleshooting information • Parts information • Links to other useful sources of information To access this information, go to http://support.lenovo.com.
Handling static-sensitive devices Static electricity, although harmless to you, can seriously damage computer components. When you are replacing a part, do not open the anti-static package containing the new part until the defective part has been removed from the computer and you are ready to install the new part. When you handle parts and other computer components, take these precautions to avoid static electricity damage: • Limit your movement.
Internal components The following illustrations show the components inside your computer.
Lenovo H520s/H530s 3 2 1 4 5 Heatsink and CPU fan System board Optical disk drive and bay Hard disk drive Power supply 38 User Guide
Lenovo H535s 3 2 1 4 5 System board Heatsink and CPU fan Optical disk drive and bay Hard disk drive Power supply User Guide 39
Identifying parts on the system board The system board (sometimes called the planar or motherboard) is the main circuit board in your computer. It provides basic computer functions and supports a variety of devices that are factory-installed or that you can install later.
Lenovo H515s 1 2 3 4 5 6 7 8 9 10 16 15 14 13 12 11 System fan header Clear CMOS jumper Battery Microprocessor and heat sink Microprocessor fan header SATA connectors (2) Memory slots (2) Hard disk drive power connector LPC debug header Front panel connector System fan header PCI express X 16 adapter slot Front USB connectors (2) Mini PCI-E slot PCI express X 1 adapter slot Front audio connector User Guide 41
Lenovo H520s 1 2 3 4 5 6 7 8 9 20 19 18 17 16 42 15 14 13 12 11 10 12V power connector Microprocessor and heat sink Microprocessor fan header Memory slots (2) Thermal sensor header Power connector Battery SATA connectors (3) eSATA connector Power fan header Front panel connector Clear CMOS jumper Front USB connectors (2) Mini PCI-E slot Mode switch connector Serial (COM2) connector PCI express X 1 adapter slots (3) Front audio connector PCI express X 16 adapter slot System f
Lenovo H530s 1 2 3 4 5 6 7 19 18 8 9 17 16 15 14 13 12 11 10 12V power connector Microprocessor and heat sink Microprocessor fan header Memory slots (2) Thermal sensor header Hard disk drive power connector Power connector Power fan header SATA connectors (3) Front panel connector Front USB connectors (2) LPC debug header Mini PCI-E slot PCI express X 1 adapter slots (3) Clear CMOS jumper Front audio connector PCI express X 16 adapter slot System fan header Battery User Guid
Lenovo H535s 1 2 3 4 5 6 7 16 15 8 14 9 13 44 12 11 10 12V power connector Microprocessor and heat sink Microprocessor fan header Memory slots (2) Thermal sensor header Mini PCI-E slot Power connector Power fan header SATA connectors (3) Front panel connector Front USB connector Front USB connector Front audio connector PCI express X 1 adapter slots (3) PCI express X 16 adapter slot System fan header User Guide
Replacing hardware Attention: Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://support.lenovo.com. Note: Use only parts provided by Lenovo.
5. Slide the computer cover toward the rear of the chassis to remove. Note: For this procedure, it helps to lay the computer on a flat, stable surface.
Removing the front bezel To remove the front bezel: 1. Remove the computer cover. Refer to “Removing the computer cover”. Note: For this procedure, it helps to lay the computer on a flat, stable surface. 2. Remove the front bezel by releasing the three plastic tabs inside the chassis and pushing the bezel outward as shown. 3.
Replacing an optical drive Attention: Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://support.lenovo.com. To replace an optical drive 1. Remove the computer cover. Refer to “Removing the computer cover”. 2.
5. Disconnect the data and power cables from the rear of the optical drive. 6. Remove the 2 screws that secure the optical drive to the optical drive bay and push the optical drive straight out of the front of the drive bay. 5 3 4 7. Slide the new optical drive into the bay from the front, then attach it to the drive bay with the screws. 8. Connect the data and power cables to the new optical drive. 9.
Replacing the hard disk drive Attention: Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://support.lenovo.com. To replace the hard disk drive 1. Remove the computer cover. Refer to “Removing the computer cover”. 2.
6. Remove the 4 screws that secure the hard disk drive to the bay. 7. Slide the hard disk drive out of the bay. 8. Install the new hard disk drive. (1) Insert the new hard disk drive into the drive bay. (2) Screw back the 4 screws on the drive bay. 9. Attach the data and power cables to the new hard disk drive. 10. Line up the hard disk drive bay, then slide it in. Reattach it to the chassis with the screws. 11. Reattach the optical drive disk bay. Refer to “Replacing an optical drive” 12.
To replace a memory module: 1. Remove the computer cover. Refer to “Removing the computer cover”. Note: For this procedure, it helps to lay the computer on a flat, stable surface. 2. Locate the memory module connectors. Refer to “Locating components”. 3. Remove the memory module being replaced by opening the retaining clips as shown. 4. Position the new memory module over the memory connector. Make sure on the memory module is correctly aligned with the connector the notch on the system board.
Replacing the keyboard and the mouse To replace the keyboard: 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down your operating system, and turn off the computer and all attached devices. 2. Unplug all power cords from electrical outlets. 3. Locate the connector for the keyboard. Refer to “Locating connectors on the rear of the computer” and “Locating connectors on the front of the computer”.
3. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover engage the rails. Then, push the computer cover closed until it snaps into position. Screw back the 2 screws on the chassis. 4. Reconnect the external cables and power cords to the computer. Refer to “Locating connectors on the front of the computer” and “Locating connectors on the rear of the computer”. Note: In most areas of the world, Lenovo requires the return of the defective CRU.
Appendix. Declaration Thank you for using Lenovo products. Carefully read all documents shipped with your computer before you install and use the product for the first time. Lenovo is not responsible for any loss except when caused by installation and operations performed by Lenovo professional service personnel. You are responsible if you fail to operate the product according to instructions and requirements in the manuals included with your computer, or operate the product inappropriately.
Trademarks Lenovo and the Lenovo logo, IdeaCentre and IdeaCentre logo are trademarks of Lenovo in the United States, other countries, or both. Microsoft, Windows, and Windows Vista are trademarks of the Microsoft group of companies. Intel Inside is a trademark of Intel Corporation in the U.S. and/or other countries.
Energy Star Statement ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with an ENERGY STAR compliant designation. The following machine types have been designed and tested to conform to the ENERGY STAR program requirement for computers at the time of manufacture.
To awaken your computer from a Sleep or System Standby mode, press any key on your keyboard. For more information about these settings, refer to your Windows Help and Support information system. Enabling ErP compliance mode You can enable the energy-related products directive (ErP) compliance mode through the Power menu in the Setup Utility program. This mode reduces electricity consumption when your computer is in standby mode or turned off.
