Lenovo IdeaCentre K3 Series Hardware Maintenance Manual

Chapter 7. Replacing hardware

4. Press the release button and push the optical drive straight out of the

front of the chassis.

5. Slide the new optical drive into the bay from the front until it snaps

into position.

6. Connect the data and power cables to the drive.

7. Install the front bezel. Refer to the steps 3 of the “Removing the front

bezel”.

8. Install the computer cover. Refer to “Completing the installation”.

Replacing the system fan assembly

Attention

Do not remove the computer cover or attempt any repair before

reading the “Important safety information” in the Safety and Warranty

Guide that was included with your computer or in the Hardware

Maintenance Manual (HMM) for the computer. To obtain copies of the

Safety and Warranty Guide or HMM, go to the Support Web site at

http://consumersupport.lenovo.com