Lenovo IdeaPad Flex 14/Flex 14D Flex 15/Flex 15D Hardware Maintenance Manual
Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 85. First Edition (August 2013) © Copyright Lenovo 2013. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents About this manual........................................iv Safety information.........................................1 General safety ...................................................... 2 Electrical safety .................................................... 3 Safety inspection guide ...................................... 5 Handling devices that are sensitive to electrostatic discharge......................................... 6 Grounding requirements ...................................
About this manual This manual contains service and reference information for the following Lenovo product: Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Use this manual to troubleshoot problems. The manual is divided into the following sections: • The common sections provide general information, guidelines, and safety information required for servicing computers. • The product-specific section includes service, reference, and product-specific parts information.
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14 1
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4.
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. Do not use such kind of mat to protect yourself from electrical shock.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage.
Safety information Safety inspection guide The purpose of this inspection guide is to assist you in identifying potential unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-Lenovo features or options not covered by this inspection guide.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1.
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery.
Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignition or explosion of the battery. La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing.
Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au moins quinze minutes.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen.
Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products.
Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Important service information This chapter presents the following important service information: • “Strategy for replacing FRUs” on page 16 – “Strategy for replacing a hard disk drive” on page 17 – “Important notice for replacing a system board” on page 17 • “Important information about replacing RoHS compliant FRUs” on page 18 Important: BIOS and device driver fixes are customer-installable.
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts.
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • When you replace FRUs, use new nylon-coated screws.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8.
General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the AC adapter. 4. Make sure that power is supplied when you turn on the computer. 5. Turn off the computer. 6. Disconnect the AC adapter and install the charged battery pack. 7. Make sure that the battery pack supplies power when you turn on the computer.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack.
Related service information Related service information This chapter presents the following information: • “Restoring the factory contents by using Recovery Disc Set” on page 23 • “Passwords” on page 24 • “Power management” on page 25 Restoring the factory contents by using Recovery Disc Set When the hard disk drive or solid state drive is replaced because of a failure, no product recovery program is on the new drive. In this case, you must use the Recovery Disc Set for the computer.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 7. When all of the data has been copied from the last disc in the set, remove the disc and restart the computer. Note: The remainder of the recovery process is fully automated and no action is required by you. The computer will restart into the Windows desktop several times and you might experience periods when no activity is apparent on the screen for several minutes at a time. This is normal. 8.
Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and hibernation. Screen blank state If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. You can also turn off the LCD backlight by pressing . To end screen blank state and resume normal operation, press .
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Shutting down the computer If you are not going to use your computer for a long time, shut it down. To shut down your computer: • Open the charms bar, then select Settings • Select Power 26 → Shut down. .
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 27 • “Status indicators” on page 29 • “FRU tests” on page 31 • “FRU replacement notices” on page 32 • “Removing and replacing an FRU” on page 33 • “Locations” on page 62 • “Parts list” on page 66 Specifications The following table lists the specifications of the Lenovo Flex 14/Flex 14D/Fl
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Table 1. Specifications (continued) Feature I/O ports Description HDMI port × 1 USB 2.0 × 2, USB 3.0 × 1 2 in 1 slot × 1 (MMC, SD) Audio Video HDMI port × 1 WLAN Intel Wifi 2x2 BGN +BT4.0 Intel Wifi A/C BGN + BT4.0 Wifi 1x1 BGN (not support Win8/Win8.1, not support ultrabook) Wifi 1x1 BGN + BT4.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Status indicators The system status indicators below show the computer status: a b 29
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Table 2. Status indicators Symbol Indicator status On (solid white) Blinking Off On (solid white) Solid amber Fast blinking amber Slow blinking amber Slow blinking white 30 Meaning The computer is powered on. The computer is in sleep mode. The computer is powered off. The battery has more than 20% charge. The battery has between 5% and 20% charge. There is a problem with the battery or the battery connection.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hotkeys The hotkeys are located in the function key row of the keyboard.By pressing the appropriate hotkey, you can change system settings instantly. The following describes the function of each hotkey. Table 3. Hotkeys : Mutes/unmutes the sound. : Enables/disables airplane mode. : Decreases the volume level. : Switches the active program. : Increases the volume level. : Turns on/off the backlight of the display. : Closes the currently active window.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 32. 3.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 1010 Battery pack DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. Figure 1. Removal steps of battery pack Unlock the manual battery latch a . Holding the spring-loaded battery latch in the unlocked position b, remove the battery pack in the direction shown by the arrow c.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Figure 1. Removal steps of battery pack (continued) Open two rubber foot pads with a screw driver in the direction shown by arrows d , then remove two screws e, five screws f, nine screws g. g e f g f d g f f g f e g g g d g g Step Screw (quantity) Color Torque a M2.5 × 5 mm, flat-head, nylokcoated (2) (Flex 14) M2.5 × 4 mm, flat-head, nylokcoated (9) (Flex 14) M2.5 x 3.0 mm, flat-head, nylok-coated (5) (Flex 14) M2.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 1020 Hard disk drive For access, remove this FRU: • “1010 Battery pack” on page 34 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damages and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Figure 2. Removal steps of hard disk drive (continued) Remove the frame fixing screws b . b b b b Step Screw (quantity) Color Torque a M2.5 × 3.0 mm, flat-head, nylok-coated (4) (Flex 14) M2.5 × 3.0 mm, flat-head, nylok-coated (4) (Flex 15) Black 3.0+/-0.4 kgfcm Black 3.0+/-0.3 kgfcm Take out the hard disk drive secured in a metal frame in the direction shown by arrow c . c Remove four screws d and detach the metal frame from the hard disk drive.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 1030 DIMM For access, remove this FRU: • “1010 Battery pack” on page 34 Figure 3. Removal steps of DIMM Release the two latches on both edges of the socket at the same time in the direction shown by arrows a, and then unplug the DIMM in the direction shown by arrow b. a a b When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into the place.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D 1040 PCI Express Mini Card for wireless LAN/WAN and SSD card For access, remove this FRU: • “1010 Battery pack” on page 34 Figure 4. Removal steps of PCI Express Mini Card for wireless LAN/WAN and SSD card Flex 14: Disconnect the two wireless LAN cables (black,white) a, and then remove the screw b. b a a Flex 15: Disconnect the two wireless LAN cables (black, white) , and then remove the screws b.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Figure 4. Removal steps of PCI Express Mini Card for wireless LAN/WAN and SSD card (continued) Remove the card in the direction shown by arrow c . c When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, and the white cable (2nd) (AUX) into jack labeled 2 on the card.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Figure 4. Removal steps of PCI Express Mini Card for wireless LAN/WAN and SSD card (continued) Flex 15: Remove the card in the direction shown by arrow b .
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 1050 Dummy card (Option) Figure 5. Removal steps of dummy cards Remove the dummy card in the direction shown by arrows a b.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D 1060 Keyboard For access, remove this FRU: • “1010 Battery pack” on page 34 Figure 6. Removal steps of keyboard Remove screws a . a a a Step Screw (quantity) Color Torque a Silver 1.85+/-0.15 kgfcm 90203947 M2.0 × 2.5 mm, flat-head, nylok-coated (3) P/N Push the back of the keyboard in the direction shown by arrow b .
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Figure 6. Removal steps of keyboard (continued) Lift the keyboard a little c , and then detach the connector in the direction shown by arrows d e . c d e When installing: Make sure that the FPC connector is attached firmly.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D 1070 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • In the whole process, make sure not to drop or stack the system board.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Figure 7. Removal steps of system board (continued) Remove five screws a and screw b . a a a b a a 46 Step Screw (quantity) Color Torque a Black 3.0+/-0.4 kgfcm Silver 1.85+/-0.15 kgfcm M2.5 × 3 mm, flat-head, nylok-coated (5) (Flex 14) M2.0 × 5.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Figure 7. Removal steps of system board (continued) Unplug sensor board and camera connector in the direction d , detach function board, volume board and touch pad connector in the direction c , unplug DCIN cable connector in the direction e , disconnect LCD connector in the direction f , detach screen-lock board connector g and LED board connector h ,unplug speaker connector i .
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 1080 Fan assembly and Heat Sink assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1040 PCI Express Mini Card for wireless LAN/WAN and SSD card” on page 39 • “1060 Keyboard” on page 43 • “1070 System board” on page 45 Figure 8. Removal steps of fan assembly and heat sink assembly Loosen screws a b .
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Figure 8. Removal steps of fan assembly and heat sink assembly (continued) Unplug the fan connector in the direction shown by arrow b. Flex 15/Flex 15D: b When installing: Make sure that the fan connector is attached firmly to the system board. Lift the fan assembly in the direction shown by arrow c. Be careful not to damage the connector.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 1090 LCD unit For access, remove this FRU: • “1010 Battery pack” on page 34 Figure 9. Removal steps of LCD unit Remove six screws a. a a a a Step Screw (quantity) a M2.5 × 4 mm, flat-head, nylok- Black coated (4) (Flex 14) M2.5 × 4 mm, flat-head, nylok- Black coated (6) (Flex 15) Color a a Torque 3.5+/-0.3 kgfcm 3.5+/-0.3 kgfcm When installing: • Route the antenna cables along the cable guides.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Figure 9. Removal steps of LCD unit (continued) Detach the LCD unit from the upper case.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 1100 Speakers, base cover, function board, DC-IN board, volume board, LED board and battery transfer board For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN and SSD card” on page 39 • “1050 Dummy card (Option)” on page 42 • “1070 System board” on page 45 Figure 10.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Figure 10. Speakers, base cover, function board, DC-IN board, volume board, LED board and battery transfer board (continued) Remove the DC-IN board in the direction shown by arrow a . a When installing: Make sure that the power connector is attached firmly. Remove screw a, and then remove the function board in the direction shown by arrow b. a b Step Screw (quantity) Color Torque a M2.5 × 3.0 mm, flat-head, nylokcoated (1) (Flex 14) Black 3.0+/-0.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Figure 10. Speakers, base cover, function board, DC-IN board, volume board, LED board and battery transfer board (continued) When installing: When attaching the audio board to the base cover, adjust the placement of the USB and headphone jacks as shown , and make sure that both of the USB and the headphone jacks are attached to the holes on the base cover. Improper placement of the jacks might cause a damage.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Figure 10. Speakers, base cover, function board, DC-IN board, volume board, LED board and battery transfer board (continued) Remove screws a to lift the battery transfer board in the direction shown by arrow b .
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. Apply those labels when you replace the base cover. For labels which are not shipped with the new base cover, peel them from the replaced base cover and adhere them to the new one.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Flex 15/Flex 15D: h a b c d e f g The following letter shows the correct location of each label. Not all labels are attached on the part you are servicing.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 1110 LCD front bezel For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN and SSD card” on page 39 • “1050 Dummy card (Option)” on page 42 • “1070 System board” on page 45 • “1090 LCD unit” on page 50 Figure 11. Removal steps of LCD front bezel Remove screws a . a a Step Screw (quantity) Color Torque a M2.5 X 4.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D 1120 LCD panel, LCD cable and hinges For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN and SSD card” on page 39 • “1050 Dummy card (Option)” on page 42 • “1070 System board” on page 45 • “1090 LCD unit” on page 50 • “1110 LCD front bezel” on page 58 Figure 12. LCD panel, LCD cable and hinges Unplug connector a , disconnect connector b to lift the LCD panel.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 1130 Integrated camera For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN and SSD card” on page 39 • “1050 Dummy card (Option)” on page 42 • “1070 System board” on page 45 • “1090 LCD unit” on page 50 • “1110 LCD front bezel” on page 58 • “1120 LCD panel, LCD cable and hinges” on page 59 Figure 13.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D 1140 Antenna assembly and LCD cover For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 DIMM” on page 38 • “1040 PCI Express Mini Card for wireless LAN/WAN and SSD card” on page 39 • “1050 Dummy card (Option)” on page 42 • “1070 System board” on page 45 • “1090 LCD unit” on page 50 • “1110 LCD front bezel” on page 58 • “1120 LCD panel, LCD cable and hinges” on page 59 Figure 14.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Locations Front view a b c d e f g h i j Integrated camera Wireless antennas Built-in microphone Display Windows button (on select models) Touch pad Touch pad buttons Numeric keypad (Flex 15/Flex 15D) Light sensing hole (on select models) System status indicators Flex 14/Flex 14D: c a c b d e f i g j 62
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Flex 15/Flex 15D: c a c b d e f i g h j 63
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Bottom and Left-side view a b c d e f g h i j USB 3.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Right-side view a b c d e f g Volume up button Volume down button Combo audio jack Memory card slot USB ports Novo button Power button c b a d g f e 65
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 67 • “LCD FRUs” on page 73 • “Keyboard” on page 75 • “Miscellaneous parts” on page 79 • “AC adapters” on page 80 • “Power cords” on page 81 Notes: • Each FRU is available for all types or models, unless specific types or models are specified.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Overall 1 2 3 e 8 6 4 7 f 5 a d 12 (11) 12 (11) (FLEX 14) (FLEX 15) 14 9 10 C 16 18 13 15 17 b 67
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Table 4. Parts list—Overall No. FRU 1 2 3 3 3 3 4 4 LCD unit (see “LCD FRUs” on page 73.) Keyboard (see “Keyboard” on page 75.) ST6 Upper Case Grey (Flex 14) ST6 Upper Case Orange (Flex 14) ST7 Upper Case Orange (Flex 15) ST7 Upper Case Grey (Flex 15) HDD, 320G 5400rpm ST320LT012 6G 7mm 5.4K 320G HDD HDD, 320G 5400rpm HTS545032A7E660 6G 7mm 5.4K 320G HDD HDD, 500G 5400rpm ST500LT012 6G 7mm 5.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Table 4. Parts list—Overall (continued) No. FRU FRU no. 6 Processor, Kabini CPU AMD A6-5200 2.0G 2M 4C A0 BGA APU(Flex 14D/Flex 15D) Processor, Kabini CPU AMD A4-5000 1.5G 2M 4C A0 BGA APU(Flex 14D/Flex 15D) Processor, Kabini CPU AMD E2-3000 1.65G 1M 2C A0 BGA APU(Flex 14D/Flex 15D) Processor, Kabini CPU AMD E1-2500 1.4G 1M 2C A0 BGA APU(Flex 14D/Flex 15D) Processor, Kabini CPU AMD E1-2100 1.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Table 4. Parts list—Overall (continued) 70 No. FRU FRU no.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Table 4. Parts list—Overall (continued) No. FRU FRU no.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Table 4. Parts list—Overall (continued) No. FRU FRU no. 14 14 DDR3L 1600 8GB SM322NW08IAF 8GB DDR3L 1600 DDR3L 1600 8GB MT16KTF1G64HZ-1G6E1 8GB DDR3L 1600 Battery, 4CELL 18650 3.4Ah 48Wh SY L12S4F01 14.4V48Wh 4cell bty Battery, 4CELL 18650 2.2Ah 32Wh SY L12S4A01 14.4V32Wh 4cell bty Battery, 4CELL 18650 2.2Ah 32Wh SP/L L12M4A01 14.4V32Wh 4cell bty Battery, 4CELL 18650 2.2Ah 32Wh LG L12L4A01 14.4V32Wh 4cell bty WLAN, WiFi 2x2 BGN+BT4.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D LCD FRUs In Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D, there are following types of LCDs. • “14.0 -in. HD TFT” • “15.6 -in.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual 14.0-in. HD TFT Table 5. Parts list—14.0-in. HD TFT No. FRU FRU no. 1 1 3 ST6 LCD Module Grey AUO ST6 LCD Module Orange AUO Panel & Touch Module 14.0" AUO B140XTT01.0 0A HD G S LED1 NB LCD (T) Panel & Touch Module 14.0" BOE HB140WXA-100 HD G S LED1 NB LCD (T) ST6 Camera 0.3M ST6 Camera HD ST6 LCD Cover 90400198 90400199 18201042 CRU ID N N N 18201133 N 90004326 90004327 90203920 N N N 3 6 6 7 15.6-in. HD TFT Table 6.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Keyboard Table 7. Parts list—Keyboard Language P/N Chicony keyboard Flex 14 Sunrex Indian Czechoslovakian Bulgarian International English Swiss Slovenian Icelandic Belgian Four Nordic countries Hungarian Hebrew Greek Dutch Japanese Brazilian Arabic German French Russian Traditional Chinese Korean Canadian English&French Latin Portuguese Thai Turkish Spanish Italian U.K.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Table 7. Parts list—Keyboard (continued) Language P/N Sunrex (continued) keyboard Flex 14 (continued) Darfon 76 Arabic German French Russian Traditional Chinese Korean Canadian English&French Latin Portuguese Thai Turkish Spanish Italian U.K.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Table 7. Parts list—Keyboard (continued) Language P/N Chicony keyboard Flex 15 Sunrex Indian Bulgarian Czechoslovakian International English Swiss Slovenian Icelandic Belgian Four Nordic countries Hungarian Hebrew Greek Dutch Japanese Brazilian Arabic German French Russian Traditional Chinese Korean Canadian English&French Latin Portuguese Thai Turkish Spanish Italian U.K.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Table 7. Parts list—Keyboard (continued) Language keyboard Flex 15 (continued) 78 P/N Arabic German French Russian Traditional Chinese Korean Canadian English&French Sunrex Latin (continued) Portuguese Thai Turkish Spanish Italian U.K.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Miscellaneous parts Table 8.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual AC adapters Table 9. Parts list—3-pin AC adapters FRU P/N 45W, 3pin Delta ADLX45NDC3A 20V2.25A adapter 45W, 3pin Liteon ADLX45NLC3A 20V2.25A adapter 45W, 3pin Chicony ADLX45NCC3A 20V2.25A adapter 65W, 3pin Delta ADLX65NDC3A 20V3.25A adapter 65W, 3pin Liteon ADLX65NLC3A 20V3.25A adapter 65W, 3pin Chicony ADLX65NCC3A 20V3.25A adapter 65W, 3pin Delta ADLX65NDC3A 20V3.25B adapter PPB (Brazail) 65W, 3pin Liteon ADLX65NLC3A 20V3.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 11.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Table 11.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Table 11.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Table 12. Parts list—power cords Region P/N CRU ID UK 145500000 * 145500001 * 145500002 * 145500003 * 145500004 * 145500005 * 145500006 * 145500007 * 145500008 * 145500009 * 145500010 * 145500011 * 145500012 * 145500013 * 145500014 * 145500015 * • lux 0031+H03VV-F 0.75/3C+0011 1m Europe • lux 0033+H03VV-F 0.75/3C+0011 1m US • lux 0014+SPT-2 60°C 18/3C+0016 1m China • lux 0036+RVV 300/300 0.
Notices Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance Manual Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary.
