Hardware Maintenance Manual

39
Lenovo IdeaTab S2109A-F
1080 LCD panel
For access, remove these FRUs in order:
• “1010 Base cover” on page 27
• “1020 Battery pack” on page 31
• “1030 System board” on page 32
• “1040 Integrated camera” on page 34
• “1050 Speakers” on page 35
• “1060 HDMI board” on page 37
• “1070 Power board” on page 38
Figure 8. Removal steps of LCD panel
Use a heater or dryers to heat up each point (a through j) on the touch panel
for 1 minute, Then insert the plastic plate tool
1
and gently disassemble the
touch panel by the plastic plate tool from point a through j.
a
e
f
g
h
i
j
b
c
d
1
Note: If you cannot insert the plastic plate tool, then continue heating each
point (a through j) for an additional 30 seconds.