User Manual and Operating Guide

OSD Icon on Main Menu Submenu Description
Brightness/Contrast Brightness Adjusts overall brightness
Contrast Adjusts difference between light and dark
areas
Image Position Horizontal Position Moves the image left or right.
Vertical Position Moves the image up or down.
Image Setup Automatic Automatically optimizes the image.
Manual Manually optimizes the image. See
"Menual image setup" page 3-3.
Clock
Phase
Save
Image Properties Color Adjusts intensity of red, green, and blue.
Preset mode Default
Reddish
Bluish
Custom Red: Increases or decreases the
saturation of "red" in the image.
Green: Increases or decreases the
saturation of "green" in the image.
Blue: Increases or decreases the
saturation of "blue" in the image.
Save: Saves the custom color choices.
Options Information Shows resolution, refresh rate, and
product details. Note: This screen does
not allow any changes to the settings.
Language This section lists the languages supported
by your monitor. Note: The language
chosen only affects the language of the
OSD. It has no effect on any software
running on the computer.
2. Use or to move among the icons. Select an icon and press to access that
function. If there is a sub-menu, you can move between options using or ,
then press to select that function. Use or to make adjustments. Press to
save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and
allow adjustments to the OSD.
Table 2-2. OSD functions
Chapter 2. Adjusting and using your monitor 2-4
·
·
·
·
·
·
·
·
·
·