L193 Wide Flat Panel Monitor User's Guide
Product numbers 6920-AS 1 First Edition (January 2007) © Copyright Lenovo 2007. A l l rights reserved. U.S. GOVERNMENT USERS - RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED RIGHTS.
Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i v Chapter 1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Shipping contents . . . . . . . . . . Attaching the base and handling your monitor Product overview . . . . . . . . . . Adjusting the tilt . . . . . . . . . Monitor controls . . . . . . . . Setting up your monitor . . . . . . . . Connecting and turning on your monitor . Registering your option . . . . . . . . . . . . . . . . . . .
Safety information Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information. Avant d’installer ce produit, lisez les consignes de sécurité. Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Chapter 1. Getting started T his U ser ’s G uide contains detailed information on your Flat Panel M onitor. For a quick overview, please see the Setup Poster that was shipped with your monitor.
Product overview This section provides information on adjusting monitor positions and setting user controls. Adjusting the tilt The illustration below shows the tilt range of the monitor. For more information, see "Positioning your monitor " on page 2-1. -5 20 Monitor controls The controls on the right side of your monitor enable you to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image” on page 2-3.
Setting up your monitor This section provides instructions on setting up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Monitor Safety, Troubleshooting, and Warranty Guide before carrying out this procedure. 1. Power off your computer and all attached devices, and unplug the computer power cord. 2. Connect the analog signal cable to the video port on the back of the computer.
3. Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. 4. Power on the monitor and the computer.
5. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. 6. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required for normal operation. Note: If automatic image setup does not establish the image that you prefer, you can perform a manual image setup. See "Manual image setup" on page 3-3 for more information.
Chapter 2. Adjusting and using your monitor This section provides information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer.
v Use adequate lighting for the type of work you are performing. v Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. v Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax.
Adjusting your monitor image This section describes the control features used to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On- Screen Display (OSD) is not displayed. Note: The direct access controls are blue. Table 2-1. Direct access controls Icon Control Description Image Setup Activates automatic image adjustment. Novo Vision Direct access to NOVO Vision. Menu Lock or unlock the OSD.
Table 2-2. OSD functions OSD Icon on Main Menu Brightness/Contrast Image Position Image Setup Submenu Brightness Contrast Adjusts difference between light and dark areas Horizontal Position Moves the image left or right. Vertical Position Moves the image up or down. Automatically optimizes the image.
Table 2-2. OSD functions (continued) OSD Icon on Main Menu Submenu Options Description Menu Position Menu position adjusts menu location on the screen. Default Default returns the menu position to the default settings. Custom v Horizontal: Changes the horizontal position of the OSD. v Vertical: Changes the vertical position of the OSD. v Save Factory Reset v Cancel v Reset Resets monitor to the original factory settings.
The display modes shown below have been optimized at the factory. Table 2-3. Factory set display modes Addressability Refresh rate 640 x 480 60 Hz, 66Hz, 72Hz, 75Hz 720 x 400 70 Hz 800 x 600 60 Hz, 72 Hz, 75 Hz 1024x768 60 Hz, 70 Hz, 75 Hz 1280x1024 60 Hz, 70 Hz, 72Hz, 75Hz, 76Hz 1440 x 900 60 Hz, 75 Hz Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: v Apply water or liquid directly to your monitor. v Use solvents or abrasives. v Use flammable cleaning materials to clean your monitor or any other electrical equipment. v Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. v Use any cleaner which contains an anti-static solution or similar additives.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 6920-xx1 6 Dimensions Height 400 mm (15.75 in.) Depth 198 mm (7.79 in.) Width Stand Tilt range 464 mm (18.27 in.) -5°/+20° VESA mount Supported 100 mm (3.94 in.) Radial arm sold separately.
Table 3-1. Monitor specifications for type-model 6920-xx1 (continued) Humidity Operating 10% to 80% Storage 5% to 95% Shipping 5% to 95% Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2.
Table 3-2. Troubleshooting (continued) Problem Possible cause Suggested action Reference Screen is blank and power indicator is steady amber or flashing green The monitor is in v Press any key on the Standby/Suspend keyboard or move the mode. mouse to restore operation. The power indicator is green, but there is no image. The video signal cable is loose or disconnected from the system or monitor. Be sure the video cable is connected with the system properly.
Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows Vista, Microsoft. Windows XP. and Microsoft Windows 2000 Professional. Installing the monitor driver in Windows Vista To install the device driver in Microsoft® Windows Vista, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista. 1. Turn off the computer and all attached devices. 2.
11. Select Install from a list or Specific location(Advanced), and then click Next. 12. Select “Don't search. I will choose the driver to install” option, and then click Next. 13. Click the Have Disk button. Click on the Browse button and navigate to the following directory: X:\Monitor Drivers\Windows XP & Windows 2000 (where X is the drive letter designator for the CD-ROM drive). 14. Select the "L193 wide.inf" file and click the Open button. Click on the OK button. 15. Select L193 wide and click Next.
Service information Product numbers The product number for your monitor is located on the back cover as shown below. backback L193 Wide TFT Monitor January 2007 6920-AS1 5.1Kg 30R5691 打印条码处 CBPC6 100-240VAC 1.
Service parts The following parts are for use by Lenovo service, or Lenovo authorized dealers, to support the customer warranty. Parts are for service use only. The table below shows information for model 6920-xx1. Table 3-3.
Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of the product. Refer to your Lenovo Statement of Limited Warranty for a full explanation of Lenovo warranty terms. Online technical support Online technical support is available during the life of your product through the Lenovo Support Web site at http://www.lenovo.com/support.
Country or Region Telephone Number Africa Africa: +44 (0)1475-555-055 South Africa: +27-11-3028888 and 0800110756 Central Africa: Contact the nearest Lenovo service provider Argentina 0800-288-5366 (Spanish) Australia 131-426 (English) Austria Up and running support: 01-24592-5901 Warranty service and support: 01-211-454-610 (German) Belgium Up and running support: 02-210-9820 (Dutch) Up and running support: 02-210-9800 (French) Warranty service and support: 02-225-3611 (Dutch, French) Bolivia
France Up and running support: 0238-557-450 Warranty service and support (hardware): 0810-631213 Warranty service and support (software): 0810-631-020 (French) Germany Up and running support: 07032-15-49201 Warranty service and support: 01805-25-35-58 (German) Greece +30-210-680-1700 Guatemala 1800-624-0051 (Spanish) Honduras Tegucigalpa: 232-4222 San Pedro Sula: 552-2234 (Spanish) Hungary +36-1-382-5720 India 1800-425-6666 +91-80-2678-8970 (English) Indonesia 800-140-3555 (English) 62-21-251
New Zealand 0800-733-222 (English) Nicaragua 001-800-220-1830 (Spanish) Norway Up and running support: 6681-1100 Warranty service and support: 8152-1550 (Norwegian) Panama 001-866-434-2080 (Toll Free) (Spanish) Peru 0-800-00-966 (Spanish) Philippines 1800-1888-1426 (English) 63-2-995-8420 (Filipino) Poland +48-22-878-6999 Portugal +351-21-892-7147 (Portuguese) Romania +4-021-224-4015 Russian Federa tion +7-495-940-2000 (Russian) Singapore 1800-3172-888 (English, Bahasa, Melayu) Slovaki
Appendix B. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.