L222 Wide FHD Flat Panel Monitor User’s Guide
Product numbers 4432-HF1 First Edition (May 2008) (c) Copyright Lenovo 2008. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Chapter1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Shipping contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety information Before installing this product, read the Safety Information.
Chapter 1. Getting started This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: • • Setup Poster Reference and Driver CD • Flat Panel Monitor • Power Cord • Analog Interface Cable - Attached to monitor Attaching the base and handling your monitor To set up your monitor, please see the illustrations below.
Product overview This section will provide information on adjusting monitor positions, setting user controls. Adjusting the tilt The illustration below shows the tile range of the monitor. For more information, see see “Positioning your monitor” on page 2-1. Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. -180o 180o Monitor controls Your monitor has controls on the front which are used to adjust the display.
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position). Please see the instructions that come with the cable lock to learn how to attach it. Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Monitor Safety, Troubleshooting, and Warranty Guide before carrying out this procedure. 1.
4. Connect the digital cable to the DVI connector of the monitor and the other end on the back of the computer. Note: The digital cable is not included with the monitor. Place the cable into the specific hook indicated in below figure. 5. Insert the power cord into the monitor ,then plug the monitor power cord and the computer cord into grounded electrical outlets. Place the cable into the specific hook indicated in below figure. Note: A certified power supply cord has to be used with this equipment.
7. Power on the monitor and the computer. 8. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. 9. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required for normal operation. Note: If automatic image setup does not establish the image that you prefer, perform manual image setup.
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer.
• Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax.
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description Input Change Switches the video input source. DDC-CI Press and hold for 10 seconds to enable or disable the DDC-CI function. Exit Exit from menu Image Setup Activates automatic image adjustment.
Using the On-Screen Display (OSD) controls To adiust the settings, the user controls can be viewed through the OSD. To use the controls: 1. Touch the lower right conner of the front bezel with finger slightly, then the function key icons will light in blue. 2. Press to open the main OSD menu. 3. Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments.
Table 2-2. OSD functions OSD Icon on Main Menu Submenu Description Controls and Adjustments (Analog) Adjusts overall brightness Brightness/ Contrast Controls and Adjustments (Digital) Same as Analog Brightness Adjusts difference between light and dark areas Contrast Moves the image left or right. Image Position Horizontal Position Vertical Position Controls Locked not required for digital input Moves the image up or down. Automatically optimizes the image.
Table 2-2. OSD functions OSD Icon on Main Menu Submenu Input video signal Description Controls and Adjustments (Analog) This monitor can accept video signals through two different connectors. Most desktop computers use a D-SUB connector. Select digital among OSD Controls when you use DVI connector. Controls and Adjustments (Digital) Same as Analog - Selects D-SUB (Analog) - Selects DVI-Digital Optimize screen for specific tasks NOVO VISION Shows resolution, refresh rate, and product details.
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-4.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. • Use any cleaner which contains an anti-static solution or similar additives.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 4432-HF1 Dimensions Height 409.00 mm (16.10 in.) Depth 190.00 mm (7.48 in.) Width 505.30 mm (19.90 in.) Stand Tilt Range: -5°, +20° VESA mount Supported 100 mm (3.94 in.) Image Viewable image size 558.68 mm (22.0 in.
Table 3-1.
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The words "Out of Range" are shown on the screen, and the power indicator is flashing green. The system is set to a display mode which is not supported by the monitor.
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The power indicator is green, but there is no image. The video signal cable is loose or disconnected from the system or monitor. Be sure the video cable is connected with the system properly. “Connecting and turning on your monitor” on page 1-3 The monitor brightness and contrast are at the lowest setting. Adjust the brightness and contrast setting on the OSD menu.
Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft® Windows XP® Microsoft Windows Vista. Please see the Install Driver section of the Reference and Driver CD for automatic installation. Installing the monitor driver in Windows Vista To use the Plug and Play feature Microsoft Windows Vista, do the following: Note: You must download file from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista. 1.
Installing the monitor driver in Windows XP To use the Plug and Play feature in Windows XP, files should be loaded from the Reference and Driver CD. Note: This section must be completed before continuing with the Windows XP automatic image setup. 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow the system to boot into Windows XP. 4.
Appendix A. Service and Support Telephone technical support Country or Region Telephone Number China 800-810-8888, (010)82879425 © Copyright Lenovo 2008.
Appendix B. Notices Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service. This information could include technical inaccuracies or typographical errors.
