Lenovo IdeaPad S200/S206 Hardware Maintenance Manual
Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 78. First Edition (February 2012) © Copyright Lenovo 2012. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents About this manual........................................iv Safety information.........................................1 General safety ...................................................... 2 Electrical safety .................................................... 3 Safety inspection guide ...................................... 5 Handling devices that are sensitive to electrostatic discharge......................................... 6 Grounding requirements ...................................
About this manual This manual contains service and reference information for the following Lenovo product: Lenovo IdeaPad S200/S206 Use this manual to troubleshoot problems. The manual is divided into the following sections: • The common sections provide general information, guidelines, and safety information required for servicing computers. • The product-specific section includes service, reference, and product-specific parts information.
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14 1
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4.
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. Do not use such kind of mat to protect yourself from electrical shock.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage.
Safety information Safety inspection guide The purpose of this inspection guide is to assist you in identifying potential unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-Lenovo features or options not covered by this inspection guide.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1.
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery.
Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignition or explosion of the battery. La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery.
Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au moins quinze minutes.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen.
Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products.
Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Important service information This chapter presents the following important service information: • “Strategy for replacing FRUs” on page 16 – “Strategy for replacing a hard disk drive” on page 17 – “Important notice for replacing a system board” on page 17 • “Important information about replacing RoHS compliant FRUs” on page 18 Important: BIOS and device driver fixes are customer-installable.
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts.
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • When you replace FRUs, use new nylon-coated screws.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8.
General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the AC adapter. 4. Make sure that power is supplied when you turn on the computer. 5. Turn off the computer. 6. Disconnect the AC adapter and install the charged battery pack. 7. Make sure that the battery pack supplies power when you turn on the computer.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator still does not light on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section.
Related service information Related service information This chapter presents the following information: • “Restoring the factory contents by using Recovery Disc Set” on page 23 • “Passwords” on page 24 • “Power management” on page 25 Restoring the factory contents by using Recovery Disc Set When the hard disk drive or solid state drive is replaced because of a failure, no product recovery program is on the new drive. In this case, you must use the Recovery Disc Set for the computer.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 7. When all of the data has been copied from the last disc in the set, remove the disc and restart the computer. Note: The remainder of the recovery process is fully automated and no action is required by you. The computer will restart into the Windows desktop several times and you might experience periods when no activity is apparent on the screen for several minutes at a time. This is normal. 8.
Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and hibernation. Screen blank state If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. You can also turn off the LCD backlight by pressing . To end screen blank state and resume normal operation, press .
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Hibernation state In hibernation state, the following occurs: • The system status, RAM, VRAM, and setup data are stored on the hard disk. • The system is powered off. To cause the computer to enter hibernation state, follow the steps below: • If you are using the ACPI operating system and have defined one of the following actions as the event that causes the system to go into hibernation state, perform that action: – Closing the lid.
Lenovo IdeaPad S200/S206 Lenovo IdeaPad S200/S206 This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 27 • “Status indicators” on page 29 • “FRU tests” on page 31 • “Fn key combinations” on page 31 • “FRU replacement notices” on page 32 • “Removing and replacing an FRU” on page 33 • “Locations” on page 59 • “Parts list” on page 62 Specifications The following table lists the specifications of the Lenovo IdeaPad S200/S20
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Table 1. Specifications (continued) Lenovo IdeaPad S200 Feature I/O ports Lenovo IdeaPad S206 Description External monitor connector Combo headphone jack Combo build in Microphone jack HDMI port × 1 USB 2.0 × 1, USB 3.0 × 1 2-in-1 memory card reader slot × 1 (MMC, SD) Audio Combo audio jack × 1 Speaker × 2 Built-in microphone Video HDMI port × 1 WLAN WWAN Bluetooth New Key Board Touch pad One piece touchpad Integrated camera 0.
Lenovo IdeaPad S200/S206 Status indicators The system status indicators below show the computer status: a b 29
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Table 2. Status indicators Indicator a Power on b Battery 30 Meaning On (solid white): The computer is powered on. Blinking: The computer is in sleep mode. off: The computer is powered off. On (solid white): The battery has more than 20% charge. Solid amber: The battery has between 5% and 20% charge. Fast blinking amber: The battery has less than 5% charge. Slow blinking amber: The battery is being charged.
Lenovo IdeaPad S200/S206 Fn key combinations The following table shows the function of each combination of Fn with a function key. Table 3. Fn key combinations Key combination Fn + PgUp: Fn + PgDn: Description Activate the Home function. Activate the End function. Hotkeys The hotkeys are located in the function key row of the keyboard.By pressing the appropriate hotkey, you can change system settings instantly. The following describes the function of each hotkey. Table 4.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration.
Lenovo IdeaPad S200/S206 Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 32. 3. Begin by removing any FRUs that have to be removed before the failing FRU.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 1010 Battery pack DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. Figure 1. Removal steps of battery pack Open two rubber foot pads with a screw driver in the direction shown by arrow a , then remove two screws b. b b a a Step Screw (quantity) Color Torque a M2 × 5 mm, flat-head, nylok-coated (2) Black 2.
Lenovo IdeaPad S200/S206 Figure 1. Removal steps of battery pack (continued) Detach the system board connector in the direction shown by arrows a b , unplug the battery connector in the direction shown by arrow c , remove five screws d . a b a d b d c d d d Step Screw (quantity) c M2 × 3 mm, flat-head, nylokcoated (5) Silver Color Torque 1.5 kgfcm Remove the battery in the direction shown by arrow e .
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 1020 Dummy card Figure 2. Removal steps of dummy cards Remove the dummy card in the direction shown by arrows a b .
Lenovo IdeaPad S200/S206 1030 Hard disk drive For access, remove these FRUs in order: • “1010 Battery pack” on page 34 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damages and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible. • Never remove the drive while the system is operating or is in suspend mode. Figure 3.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Figure 3. Removal steps of hard disk drive (continued) Take out the hard disk drive secured in a metal frame in the direction shown by arrows c d . c d When installing: Make sure that the HDD connector is attached firmly.
Lenovo IdeaPad S200/S206 1040 DIMM For access, remove these FRUs in order: • “1010 Battery pack” on page 34 Figure 4. Removal steps of DIMM Release the two latches on both edges of the socket at the same time in the direction shown by arrows a, and then unplug the DIMM in the direction shown by arrow b. a a b When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into the place.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 1050 PCI Express Mini Card for wireless LAN/WAN For access, remove these FRUs in order: • “1010 Battery pack” on page 34 Figure 5. Removal steps of PCI Express Mini Card for wireless LAN/WAN Disconnect the two wireless LAN cables a, and then remove the screws b.
Lenovo IdeaPad S200/S206 Figure 5. Removal steps of PCI Express Mini Card for wireless LAN/WAN (continued) Remove the card in the direction shown by arrow c . c When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, and the white cable (2nd) (AUX) into jack labeled 2 on the card.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 1060 3G Card For access, remove these FRUs in order: • “1010 Battery pack” on page 34 Figure 6. Removal steps of 3G Card Disconnect two connectors a and remove the screw b . b a Step Screw (quantity) Color Torque a M2 × 3 mm, flat-head, nylok-coated (1) Silver 1.5 kgfcm Remove the card in the direction shown by arrow c .
Lenovo IdeaPad S200/S206 1070 Keyboard For access, remove this FRU: • “1010 Battery pack” on page 34 • “1030 Hard disk drive” on page 37 • “1040 DIMM” on page 39 • “1050 PCI Express Mini Card for wireless LAN/WAN” on page 40 • “1060 3G Card” on page 42 Figure 7. Removal steps of keyboard Remove the screw a . a Step Screw (quantity) Color Torque a M2 × 3 mm, flat-head, nylok-coated (1) Silver 1.5 kgfcm Loosen the keyboard with fingers in the direction shown by arrow b .
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Figure 7. Removal steps of keyboard (continued) Lift the keyboard a little c , and then detach the connector in the direction shown by arrow d . c d When installing: Make sure that the FPC connector is attached firmly.
Lenovo IdeaPad S200/S206 1080 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • In the whole process, make sure not to drop or stack the system board. • If you put a system board down, make sure to put it only on a padded surface such as an ESD mat or conductive corrugated material.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Figure 8. Removal steps of system board Remove six screws a on the system board, two screws a on the IO board and single screw b on the fan. Detach the power board connector in the direction shown by arrows e f , unplug the speaker connector in the direction shown by arrow g , system board power connector in the direction shown by arrow h , two LCD connectors in the direction shown by arrows c d .
Lenovo IdeaPad S200/S206 Figure 8. Removal steps of system board (continued) Remove the system board in the direction shown by arrow i. i a b c When installing: When attaching the system board to the base cover, adjust the placement of the USB, HDMI, Power jacks as shown in , and make sure that they are attached to the holes on the base cover as shown. Improper placement of those jacks might cause a damage.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 1090 LCD unit For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 Hard disk drive” on page 37 • “1040 DIMM” on page 39 • “1050 PCI Express Mini Card for wireless LAN/WAN” on page 40 • “1060 3G Card” on page 42 • “1070 Keyboard” on page 43 • “1080 System board” on page 45 Figure 9. Removal steps of LCD unit Remove four screws a. a a a a Step Screw (quantity) a M2 × 3.
Lenovo IdeaPad S200/S206 Figure 9. Removal steps of LCD unit (continued) Remove the LCD unit in the direction shown by arrow b .
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 1100 Fan assembly and Heat Sink assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 Hard disk drive” on page 37 • “1040 DIMM” on page 39 • “1050 PCI Express Mini Card for wireless LAN/WAN” on page 40 • “1060 3G Card” on page 42 • “1070 Keyboard” on page 43 • “1080 System board” on page 45 Figure 10. Removal steps of fan assembly and heat sink assembly Detach the fan connector in the direction shown by arrow a.
Lenovo IdeaPad S200/S206 Lift the fan assembly and heat sink assembly in the direction shown by arrow d. Be careful not to damage the connector.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 1110 Base cover, speakers and power assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 Hard disk drive” on page 37 • “1040 DIMM” on page 39 • “1050 PCI Express Mini Card for wireless LAN/WAN” on page 40 • “1060 3G Card” on page 42 • “1070 Keyboard” on page 43 • “1080 System board” on page 45 • “1090 LCD unit” on page 48 • “1100 Fan assembly and Heat Sink assembly” on page 50 Figure 11.
Lenovo IdeaPad S200/S206 Remove four screws c, and then remove the speakers in the direction shown by arrows d. c c c d c d Step Screw (quantity) Color Torque b M2 × 3 mm, flat-head, nylok-coated (4) Silver 1.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following label: The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
Lenovo IdeaPad S200/S206 1120 LCD front bezel For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 Hard disk drive” on page 37 • “1040 DIMM” on page 39 • “1050 PCI Express Mini Card for wireless LAN/WAN” on page 40 • “1060 3G Card” on page 42 • “1070 Keyboard” on page 43 • “1080 System board” on page 45 • “1090 LCD unit” on page 48 • “1100 Fan assembly and Heat Sink assembly” on page 50 • “1110 Base cover, speakers and power assembly” on page 52 Figure 12.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 1130 LCD panel, LCD cable and hinges For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 Hard disk drive” on page 37 • “1040 DIMM” on page 39 • “1050 PCI Express Mini Card for wireless LAN/WAN” on page 40 • “1060 3G Card” on page 42 • “1070 Keyboard” on page 43 • “1080 System board” on page 45 • “1090 LCD unit” on page 48 • “1100 Fan assembly and Heat Sink assembly” on page 50 • “1110 Base cover, speakers and power assembly”
Lenovo IdeaPad S200/S206 Figure 13. Removal steps of LCD panel, LCD cable and hinges Remove eight screws e and the hinges in the direction shown by arrows f . e ee e e f f e e e Step Screw (quantity) Color Torque c M2 × 3.5 mm, flat-head, nylokcoated (8) Silver 1.5 kgfcm Note: The LCD cables are attached to the LCD panel by a metal connector.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 1140 Integrated camera For access, remove these FRUs in order: • “1010 Battery pack” on page 34 • “1030 Hard disk drive” on page 37 • “1040 DIMM” on page 39 • “1050 PCI Express Mini Card for wireless LAN/WAN” on page 40 • “1060 3G Card” on page 42 • “1070 Keyboard” on page 43 • “1080 System board” on page 45 • “1090 LCD unit” on page 48 • “1100 Fan assembly and Heat Sink assembly” on page 50 • “1110 Base cover, speakers and power assembly” on page 52 • “
Lenovo IdeaPad S200/S206 Locations Front view a b c d e f Integrated camera (On select models) Wireless module antennas (On select models) Computer display Power button Fan louvers Touchpad a b c b e d f 59
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Right-side view a Memory card slot b USB 2.
Lenovo IdeaPad S200/S206 Bottom and Left-side view a b c d e f g h i Louvers Speakers System status indicators AC power adapter jack HDMI port USB 3.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 63 • “LCD FRUs” on page 67 • “Keyboard” on page 69 • “Miscellaneous parts” on page 73 • “AC adapters” on page 74 • “Power cords” on page 75 Notes: • Each FRU is available for all types or models, unless specific types or models are specified.
Lenovo IdeaPad S200/S206 Overall 1 2 3 h g 4 5 9 (1) 9 i 6 f 7 c 8 8 (1) b 10 d 12 11 13 j e 15 15 (1) a 14 63
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Table 4. Parts list—Overall No. FRU 1 2 3 3 4 4 5 5 5 5 6 LCD unit (see “LCD FRUs” on page 67.) Keyboard (see “Keyboard” on page 69.
Lenovo IdeaPad S200/S206 Table 4. Parts list—Overall (continued) No. FRU FRU no. 9 9 9 9 10 10 11 Intel N2800 1.86G B2 6.5W 2cBGA processor (S200) Intel N2100 1.6G B2 3W 1cBGA ES processor (S200) AMD C60 1.3G/1.0G 1M 2C C0 BGA CPU (S206) AMD C50 1.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Table 4. Parts list—Overall (continued) No. FRU FRU no.
Lenovo IdeaPad S200/S206 LCD FRUs In Lenovo IdeaPad S200/S206, there are following types of LCDs. • “17.3 -in.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual 17.3-in. HD TFT Table 5. Parts list—17.3-in. HD TFT No. FRU FRU no. 1 1 2 WINNIE LCD Bezle Grey (Bcover_Grey S200) WOODY LCD Bezle Black (S206) Panel, 11.6 Flat, AUO, AUO B116XW03 V0 HD G F LED1 NB LCD Panel, 11.6 Flat, CMI, CMI N116BGE-L42 HD G F LED1 NB LCD Panel, 11.6 Flat, SEC, SEC LTN116AT06 L02 HD G F LED1 NB LCD Panel, 11.6 Flat, IVO, IVO M116NWR1 R4 HD G F LED1 NB LCD WINNIE Camera Board 0.3M (CAM 0.3M S200) WINNIE Camera Board 0.
Lenovo IdeaPad S200/S206 Keyboard Table 6. Parts list—Keyboard Language P/N Sunrex (black) S200/S206 Sunrex (white) Bulgarian Czechoslovakian International English Swiss Slovenian Icelandic Belgian Four Nordic countries Hungarian Hebrew Greek Dutch Japanese Brazilian Arabic German French Russian Traditional Chinese Korean Canadian English&French Latin Portuguese Thai Turkish Spanish Italian U.K.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Table 6. Parts list—Keyboard (continued) Language P/N Sunrex (white) (continued) S200/S206 (continued) Chicony (black) 70 French Russian Traditional Chinese Korean Canadian English&French Latin Portuguese Thai Turkish Spanish Italian U.K.
Lenovo IdeaPad S200/S206 Table 6. Parts list—Keyboard (continued) Language P/N Chicony (white) S200/S206 (continued) Dafon (black) Bulgarian Czechoslovakian International English Swiss Slovenian Icelandic Belgian Four Nordic countries Hungarian Hebrew Greek Dutch Japanese Brazilian Arabic German French Russian Traditional Chinese Korean Canadian English&French Latin Portuguese Thai Turkish Spanish Italian U.K.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Table 6. Parts list—Keyboard (continued) Language P/N Dafon (black) (continued) S200/S206 (continued) Dafon (white) 72 French Russian Traditional Chinese Korean Canadian English&French Latin Portuguese Thai Turkish Spanish Italian U.K.
Lenovo IdeaPad S200/S206 Miscellaneous parts Table 7.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual AC adapters Table 8.
Lenovo IdeaPad S200/S206 Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 9.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Table 9.
Lenovo IdeaPad S200/S206 Table 9.
Lenovo IdeaPad S200/S206 Hardware Maintenance Manual Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Notices Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary.
