Hardware Maintenance Manual - Lenovo S20-30, S20-30 Touch

Lenovo S20-30 / S20-30 Touch Hardware Maintenance Manual
40
1040 Fan assembly and Heat Sink assembly
For access, remove this FRU:
• “1010 Battery pack” on page 34
Figure 5. Removal steps of fan assembly and heat sink assembly
Loosen three screws , and remove the heat sink assembly.
Unplug the fan connector in the direction shown by arrow , Loosen three
screws .
When installing: Make sure that the fan connector is attached firmly to the
system board.
Step Screw (quantity) Color Torque
M2 × 3 mm, flat-head, nylok-coated (3)
M2 × 5 mm, flat-head, nylok-coated (2)
Black
Black
1.35 kgfcm
1.85 kgfcm
a
a
a
a
b
c
c
c
c
b
a