User Manual

Chapter 3. Reference information
This section contains monitor specifications, instructions to manually install the
monitor driver, troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications for type-model LI2223swA
Dimensions Depth 184.6 mm (7.27 in.)
Height 377.1 mm (14.85 in.)
Width 498.9 mm (19.64 in.)
Stand Tilt Range: -5~ 22
VESA mount Supported 75 mm x 75 mm (2.95 in. x 2.95 in.)
Image Viewable image size 546.2 mm (21.5 in.)
Maximum height 267.79 mm (10.54 in.)
Maximum width 476.06 mm (18.74 in.)
Pixel pitch 0.248 mm (0.01 in.)
Power input Supply voltage 90-264VAC (100~240VAC+/-10%)
Max supply current 1.5 A
Power consumption
Note: Power consumption
figures are for the monitor
and the power supply
combined
Normal operation <28W
Standby/Suspend <0.5W (Analog), <0.5W(Digital)
Off <0.5W at 100Vac & 240Vac
Video input (Analog) Input signal Analog Direct Drive, 75 ohm 0.7V
Horizontal 1920 pixels (max)
addressability --
Vertical addressability 1080 lines (max)
Clock frequency 205 MHz
Video input (DVI) Interface DVI
Input signal VESA TMDS (Panel Link™)
Horizontal 1920 pixels (max)
addressability --
Vertical addressability 1080 lines (max)
Clock frequency 165 MHz
Chapter 3. 3-1