Manual

Appendix C. C-3
Cleaning the Touch Screen
To clean the touch screen, use a lint-free, soft cloth dampened with standard, household glass
cleaningsolution as follows:
Spray a small amount of glass cleaner onto the cloth.1.
Wipe the glass of the touch screen to remove any dirt, dust, or nger marks.2.
Wipe the clear surfaces around the edges of the screen.3.
Remove any residual glass cleaner with a dry, soft, lint-free cloth.4.
WARNING:
Do not spray the cleaner directly onto the touch screen as this could leave residue on the optical
surfaces.
Do not use an abrasive cleaner or rough cloth as this could damage the optics.
Operating the Touch Screen
Single-Touch Mouse Operation
The Lenovo LI2341t Wide Monitor touch screen provides full mouse functionality—click, drag,
double-click and right-click.
Single click is performed by tapping you nger once on the screen.•
Double click is performed by tapping your nger twice on the screen in quick succession.•
Drag is performed by touching and moving your nger across the screen without lifting off.•
Right click is performed by touching and holding your nger in one position for a short time.•
The sensitivity of double-click and right-click can be set using <Conguration Software>. You can
disable the right-click function completely by setting its response time to zero.
Operating notes
The touch screen does not require pressure to sense a touch.
For best results, point at roughly right angles to the screen and
keep the rest of your hand clear of the glass.
When removing your nger, lift it straight off the screen,
making sure you don’t drag it across the screen.