Operation Manual

34
Appendix A. CRU instructions
5 Remove the frame fixing screw .
6 Remove the hard disk drive by gently pulling in the direction of the
arrow .
7 Remove the screws and detach the metal frame from the hard disk drive.
8 Attach the metal frame to a new hard disk drive and tighten the screws.
9 Slide the new hard disk drive firmly into place, and then reinstall the
frame fixing screw to secure the drive.
0 Reinstall the bottom slot cover and tighten the screws.
A Reinstall the battery pack. For details, see “Replacing the battery pack” on
page 28.
B Turn the computer over again. Reconnect the AC power adapter and the
cables to the computer.
c
3
d
4