Operation Manual

40
Appendix A. CRU instructions
Replacing the optical drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the optical drive, do the following:
1 Turn off the computer; then disconnect the AC power adapter and all
cables from the computer.
2 Close the computer display, and then turn the computer over.
3 Remove the battery pack. For details, see “Replacing the battery pack” on
page 28.
4 Remove the screws , and then remove the bottom slot cover .
5 Remove the screw shown in the illustration .
a
b
1
1
2
1
2
c
3
1
2