User's Manual

36
4
When the LED indicator display changes to that shown below, the printer is ready to
scan the second side of the ID card.
Start indicator flashes green
Power indicator flashes green
Turn the ID card over and put it in the same position as before. Press the
start key
to scan the back side.
5
The printer will automatically print both sides of the ID card onto one side of paper.
Notes
• After copying the both sides of the ID card,, the printer will remain in double-sided
copy mode for one minute. If no operation is performed within one minute, the
printer will return to its ready to copy state.
• You can also cancel double-sided copy mode by pressing and holding the power
key.
The LED indicator display shown below indicates the current task is being
canceled.
Start indicator is off
Power indicator alternates between
red and green every 0.5 seconds.
• The LED indicator display shown below indicates that the printer is in sleep mode.
Start indicator is off
Power indicator slowly flashes green
Press any key to wake the printer. Please refer to Chapter 9: Key Function and
Indicator Guide for details.
<->