Operation Manual

Chapter 4: Configuring the Application
SecureMind Surveillance Manager
Page 26
Chapter 4: Configuring the Application
After installing and setting up the application, you must configure the SecureMind Surveillance Manager
application.
4.1 Adding Cameras
You can add cameras using any of the following ways:
 Searching and Adding IP Cameras
 Adding IP Camera Manually
 Adding USB Camera
 Note: You can add cameras at any time in any order.
4.1.1 Searching and Adding IP Camera
This section describes how to add the cameras available on the network to the application.
! Important: This application supports the Fixed IP, USB, and PTZ cameras.
 To search and add cameras, perform the following:
1. On the NAS Device homepage, click to open the Surveillance Manager application.
Figure 18. SecureMind Surveillance Manager