Operation Manual

Chapter 4: Configuring the Application
SecureMind Surveillance Manager
Page 36
 To connect the device to the CMS Server, perform the following:
1. Go to Settings > Remote View Settings.
Figure 29. Connecting Device to CMS Server
2. In Connect this device to CMS server, enter the following:
a. In CMS IP Address or host name, enter the IP address of CMS Server.
b. In Customer ID, enter the customer ID for which you want to attach the CPE.
c. In LenovoEMC px4-300r Username, enter the user name of the application on the network
storage device.
d. In LenovoEMC px4-300r Password, enter the password of the application on the network
storage device.
e. Select Establish communication with CMS to connect with the CMS server. If the connection is
successful, then the countries, cities, and locations available on the CMS server is retrieved and
displayed.
f. In Select Country where device is located, select the required country where the network
storage device is located.
g. In Select City where device is located, select the required city where the network storage
device is located.
h. In Select location where device is located, select the required location where the network
storage device is located.
3. Click Apply.
The NAS device is connected to the CMS server.