Operation Manual

Chapter 4: Configuring the Application
SecureMind Surveillance Manager
Page 55
Advertisement Display Sequence
 To configure the advertisement display sequence, perform the following:
1. Go to Settings > Device Display > Advertisement Display Sequence.
Figure 44. Advertisement Display Sequence
2. In Show full screen ads interlaced on live view, select Yes, if you want to knit the
advertisement with live view or No, if you do not want to knit the advertisement with live view.
3. Dwell Time is the same for cameras and advertisements.
4. Click Upload Ad file, to add an advertisement image file.
The uploaded file is displayed in the Set Advertisement Sequence list.
 Note: You can add up to 25 advertisement image files.
5. Use the or the icons to organize the advertisement sequence.
6. (Optional) Click Reset to rearrange the advertisement sequence to the default sequence.
7. (Optional) Click Delete to remove the camera from the list.
8. In Play an ad after every: < n > seconds, select the required seconds to provide an interval
between the advertisement display. This is a multiple of the dwell time selected for the camera.
9. Click Apply to save the settings.