Operation Manual

Chapter 4: Configuring the Application
SecureMind Surveillance Manager
Page 62
3. In Activity ROI, select the required ROI:
a. Region of Interest1: Select this option to define the first region of interest.
b. Region of Interest2: Select this option to define the second region of interest.
c. Region of Interest3: Select this option to define the third region of interest.
4. In Shape Properties, select the following:
a. Vertex Points: Select the required vertex points. The points can vary from three to six.
b. Line color: Click to change the line color. This allows you to differentiate between the
different ROI.
5. In Detection Sensitivity, use the slider to adjust the sensitive levels. You can set the level between
0-10.
 Note: It is recommended that you set the sensitive level to 5. If you increase, then the
camera will be more sensitive to the changes in the video. If you decrease, then the camera
will be less sensitive to the changes in the video.
6. Click Apply to save the changes.